Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
304 efi v8 adapter kit for fj62
Moderators: toaddog, Elmo, DUDELUX
304 efi v8 adapter kit for fj62
Just curious i have a 304 efi holden v8 im not sure on how much is needed from marks adapters and also how much will it set me back any help would be awesome cheers.
Re: 304 efi v8 adapter kit for fj62
Budget about $2500 from marks adaptors to get,sic60driva wrote:Just curious i have a 304 efi holden v8 im not sure on how much is needed from marks adapters and also how much will it set me back any help would be awesome cheers.
Bellhousing,
Loom,
Engine and chassis mounts,
Tacho interface,
Master cylinder,
etc, etc
But ask here regarding which parts you should buy from marks and which parts can be sourced from places like brake and clutch supliers, auto shops, etc.
Cheers
Twisted by Design
I have one for sale which might suit.
Marks 4WD Adapter - Holden V8 to Toyota A340F Auto Adapter &
A340F Auto from a FJ73 Landcrusier. $1200.
I was going to swap the 304 and auto into my 40, but going to keep the manual now (lots of mods needed to squeeze the auto into the 40)
Marks 4WD Adapter - Holden V8 to Toyota A340F Auto Adapter &
A340F Auto from a FJ73 Landcrusier. $1200.
I was going to swap the 304 and auto into my 40, but going to keep the manual now (lots of mods needed to squeeze the auto into the 40)
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Im here for the sausage!
it depends on gbox choice etc?
i use a TH400 auto behind my 304. and then i have adaptor to transfers.
i also bought engine mounts.
wiring was done by mates. but if i had $$ and time over would get the marks wiring kit i think?
but depends on budget and what you do with truck?
i use a TH400 auto behind my 304. and then i have adaptor to transfers.
i also bought engine mounts.
wiring was done by mates. but if i had $$ and time over would get the marks wiring kit i think?
but depends on budget and what you do with truck?
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
Who is online
Users browsing this forum: No registered users and 0 guests