Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

adjustable lower control arms

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 8
Joined: Thu Feb 12, 2009 9:03 pm
Location: South West

adjustable lower control arms

Post by Benny Jahmin »

hi there
i just recieved my adjustable control arms from superior .. i am running a patrol with 4 inch lift . how critical is the adjustment .. i know the diff and gear box angles are suposed to be parralell .. is there an easy way of checking this ?? or is there a specific measurement longer than standard that would work

cheers benny
Top
Posts: 303
Joined: Wed Nov 24, 2004 8:25 pm
Location: gold coast

Post by mavzilla »

20 mm lomger should do the trick just fine
wish list (lockers,lift,endless air,winch,bar,spotties,35s,paint job,turbo,18yrs old hottie
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

aswell as pinion angle, you should also be trying to get spring and damper mounts on the axle looking good in relation to their mounts on the chassis.

18mm did it for my mates GQ shorty with 3 inch lift.

oh, and he also had adjustable uppers aswell, which i assume you have also.
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Post by shortyq »

you mean trailing arms!
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

shortyq wrote:you mean trailing arms!
no the rears are not "trailing arms" they are leading arms

whats the problem with calling them lower control arms anyway?
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

steel wrote:
shortyq wrote:you mean trailing arms!
no the rears are not "trailing arms" they are leading arms

whats the problem with calling them lower control arms anyway?
this is outers.. wat else did u expect?
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

crankycruiser wrote:
steel wrote:
shortyq wrote:you mean trailing arms!
no the rears are not "trailing arms" they are leading arms

whats the problem with calling them lower control arms anyway?
this is outers.. wat else did u expect?
can get frustrating on here lately, some people are to quick to use the !!!!!!! key.
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

lol
tomato

tomATO..

same shit different bucket really!
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

steel wrote:
shortyq wrote:you mean trailing arms!
no the rears are not "trailing arms" they are leading arms

whats the problem with calling them lower control arms anyway?
I have never heard rear arms called "leading" arms?? Always used the term trailing arms, so does everyone who sells them.
Top
Posts: 257
Joined: Fri Jun 20, 2008 4:00 pm
Location: Far North QLD

Post by steve patrol »

Does everyone know what he's talking about though??? Call em lower steel thingymagiggs with a rubber thingy at both ends that goes from big steel thing under the truck to the big steel thing that the tyres are connected to... who cares what you call it... you know what he means :finger: :finger: :finger: :finger: :finger: :finger: :finger: :finger: :finger: its not a uni degree, just a sorce of info... my 2c :roll:
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

front control arms are called trailing arms because they are "trailing the axle", or,,, the axle is "leading the arms".
rear control arms are called leading arms because the axle is trailing them.

i cut my teeth on rangies, and all related literature used the terminology described above.
Top
Posts: 1711
Joined: Mon May 10, 2004 7:19 am
Location: Kalgoorlie WA

Contact:
Contact roverrat

Post by roverrat »

*crickets* lol outers is gettin very pedantic
We are put on this earth for one thing, and one thing only, to die. What you do in the mean time is entirely up to you!

http://www.outerlimits4x4.com/ftopic52067.php
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

I thought they were upper and lower "Control Arms"!!!!!!!!!!

:finger: :finger: :finger: :D
Top
Posts: 317
Joined: Thu Dec 11, 2008 8:22 pm
Location: Oriental 4WD Adelaide

Post by mhgill »

Your all anal!

:rofl:

WGAF!!! (work that one out)
GQ 5" coils 35" Muds FOR SALE
98 GU 4500 ST Stock.
Top
Posts: 73
Joined: Wed Dec 13, 2006 5:21 pm

Post by Luxo »

steel wrote:front control arms are called trailing arms because they are "trailing the axle", or,,, the axle is "leading the arms".
rear control arms are called leading arms because the axle is trailing them.

i cut my teeth on rangies, and all related literature used the terminology described above.
I disagree. The rear arms are called trailing arms, control arm is acceptable terminology even though a control arm generally refers to a wishbone type setup. The fronts are leading arms or to be anal they should actually be referred to as Radius arms.
I may be slow but I'm ahead of you!
Top
Posts: 58
Joined: Sun Aug 24, 2008 6:27 pm
Location: Melbourne

Post by GQuick »

i think i speak for most when i say, honestly, who gives a shit what they are called, we do or should know what he is talking about. petty pedantic crap :bad-words:
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests