Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff angles gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 85
Joined: Sat Aug 22, 2009 11:03 pm
Location: sydney

Diff angles gq

Post by brendo4b »

can anyone tell me what the rear diff angle shoulb be along with the gearbox/engine angle
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

pinion angle and transfer output angle should be parallel.
Top
Posts: 223
Joined: Sat Feb 03, 2007 9:44 pm
Location: South Frankston, Melbourne

Post by maccasMQ »

but in a lifted car the diff is alot lower than the output of the gearbox, so if both angles were level, the tailshaft would be on a steep angle which isnt good. Wouldnt it be better to aim the pinion up towards the gearbox output?
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

yes that can be done, but you risk running the pinion gear dry.
Top
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

Post by JemmyBubbles »

In a typical driveshaft setup (ie; two uni's) the two outputs must be parallel to alleviate vibrations. As you have mentioned in a lifted vehicle the operating angle of the driveshaft may be too steep which will cause driveline vibrations. You can try to get around this be using raised engine mounts, dropped transfer case mounts and ensuring the pinion is parallel to the new transfer output angle.

In a double cardinal setup you have to ensure that the Pinion Uni Joint has no angle to ensure there are no driveline vibrations. I never had any problems with running my pinion gear dry ? ? ?
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests