)
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
brake light and turn signal short on a 90 US Rocky
Moderator: Tiny
brake light and turn signal short on a 90 US Rocky
Just wondering if anyone else has had the stop light blow fuses and the turn signals as well. Obviously a short somewhere, but just wanted to know if anyone could give me some hints for the needle in the haystack...thanks (hand signals are so old school )
)
Ok, fissed as a part here, so apologies for any incomprehensible words in this post.
There has been numerous posts about the wiring to the rear lights stuffing up because of the wiring rubbing and shorting on the chassis, where it passes obver the chassis in front of the rear wheel. This is only in the F series Daihatsus, of which the USA Rocky/ala Feroza/Sportrak isnt a member. Its worth a look, but I really dont think this is the problem.
Try a crook earth, maybe rust or mud/crud in the bulb sockets. Take the builbs out opf the sockets, and give then a goosd spray with something like WD40, or similar dewatering fluid.
There has been numerous posts about the wiring to the rear lights stuffing up because of the wiring rubbing and shorting on the chassis, where it passes obver the chassis in front of the rear wheel. This is only in the F series Daihatsus, of which the USA Rocky/ala Feroza/Sportrak isnt a member. Its worth a look, but I really dont think this is the problem.
Try a crook earth, maybe rust or mud/crud in the bulb sockets. Take the builbs out opf the sockets, and give then a goosd spray with something like WD40, or similar dewatering fluid.
Mud makes excellent toothpaste.
Who is online
Users browsing this forum: No registered users and 1 guest