Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
will this fit
Moderators: toaddog, Elmo, DUDELUX
will this fit
my lux is an 86 solid axle, ln65. how hard would it be to fit a bullbar to my lux?? the bullbar is from a 93 solid axle ln106
i know it wont bolt up, i know id have to make something up, is it worth doing if i can get the bar fairly cheap??
i know it wont bolt up, i know id have to make something up, is it worth doing if i can get the bar fairly cheap??
MrsForby wrote: Oh I desperately truly love the taco.
lux
I fitted a 93 bar to a 86 lux a while ago.
Take the old bar off hold the new bar up and have a look at what you need to do. EASY
Take the old bar off hold the new bar up and have a look at what you need to do. EASY
Remember some days your the pigeon and other days your the statue
not sure if it will work for you but i fitted a ln65 bullbar to my ln106 with only a little bit of grinding of the bar but it is a profile style bar not a winch bar
pics of the bar in the link
http://www.outerlimits4x4.com/ftopic111.91-0-0-asc-.php
pics of the bar in the link
http://www.outerlimits4x4.com/ftopic111.91-0-0-asc-.php
i got an ln106 bullbar on my ln65 lux.
but is only held together by 2 bolts at the front atm.
as im lazy and cant be bothered working on the red lux anymore.
I had to cut the arms off to fit it.
then those arms have to be lengthened and weleded.
either way the bullbar is going to have to be cut and welded due to the body lift.
Is it a winch bar?
cheers
Dan
but is only held together by 2 bolts at the front atm.
as im lazy and cant be bothered working on the red lux anymore.
I had to cut the arms off to fit it.
then those arms have to be lengthened and weleded.
either way the bullbar is going to have to be cut and welded due to the body lift.
Is it a winch bar?
cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Also depends on what brand of bar it is.
I know that my ARB bar on my blue lux is different to toyota bars.
As in the brackets that are used.
Cheers
Dan
I know that my ARB bar on my blue lux is different to toyota bars.
As in the brackets that are used.
Cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
its a tjm bar, tube style, it was a bargain so i bought it, came with bumper, which im not planning on using. i put it on some blocks in front of the car last night to see if it will work, it looks as though it will fit ok and bolt up to the holes that my recovery hooks are in, just have to get some brackets to suit. it also looks like it wont have to be modded for the body lift.
MrsForby wrote: Oh I desperately truly love the taco.
lux
well there you goDUDELUX wrote:its a tjm bar, tube style, it was a bargain so i bought it, came with bumper, which im not planning on using. i put it on some blocks in front of the car last night to see if it will work, it looks as though it will fit ok and bolt up to the holes that my recovery hooks are in, just have to get some brackets to suit. it also looks like it wont have to be modded for the body lift.
Remember some days your the pigeon and other days your the statue
the plan is to mount this bar using 2 bits of 8mm thick steel angle. holes drilled into angle and ill use m12 hitensile bolts, flat washers and nyloc nuts, side of angle bolted to bar, the top of angle bolted into chassis rails, same holes as used for recovery hooks.
does that make sense??
what are your thoughts??
does that make sense??
what are your thoughts??
MrsForby wrote: Oh I desperately truly love the taco.
lux
would you like someone to come up and do it for you
Remember some days your the pigeon and other days your the statue
lux
Sorry but it's near impossible to answer these sort of questions without seeing it. Just use some common sense and make it twice as strong as you think it would need to be. Can't go wrong.
Remember some days your the pigeon and other days your the statue
no not a winch bar,
http://i856.photobucket.com/albums/ab12 ... 009070.jpg
similar style to this, fitted with bumper bar which im not using
http://i856.photobucket.com/albums/ab12 ... 009070.jpg
similar style to this, fitted with bumper bar which im not using
MrsForby wrote: Oh I desperately truly love the taco.
heres another, the one ive got is more like this but steel and mine has another tube on each side at the bottom covering the bumper.
the plan is to chop them off off and it will look like this one
http://i432.photobucket.com/albums/qq42 ... g25008.jpg
the plan is to chop them off off and it will look like this one
http://i432.photobucket.com/albums/qq42 ... g25008.jpg
MrsForby wrote: Oh I desperately truly love the taco.
Who is online
Users browsing this forum: No registered users and 4 guests