Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Been asked before i am sure, just couldnt find the post.
I can do all the other ones, H1, H3 H4 Hi/Lo blah blah blah. But i be stuffed i can find H2 HID kits .
they r in cibie turini lights, and no i dont want get diff ones. I think they r tops. I got light force 240's and IPF's as well and the turini's shit all over the others (my opinion).
thanks anyways AJ
"Built by toyota, Powered by HOLD-ON"
98' single cab hilux, 5.0ltr EFI holden V8
No we can't get H2 globe we get ask this about 4 x a week as some rallye 2000 have them as well .
Cibie are makeing the turini in a h1 but i don't know when it will be out
i have fitted hid to them in the passed i think i used a h3 globe
the H3 globe is about 1.5mm taller then the H2 globe you just need to stuff around a bit or send it to me and i will do it for you
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
on4tou wrote:No we can't get H2 globe we get ask this about 4 x a week
i have fitted hid to them in the passed i think i used a h3 globe
the H3 globe is about 1.5mm taller then the H2 globe you just need to stuff around a bit or send it to me and i will do it for you
steve
I haven't bothered to look at the globes, but is there an opportunity for an "adaptor" to allow H3 globes to be installed in H2 housings?
the H2 is a pretty basic bulb, its just the glass bulb with 2 flat contact plates. The Rally 2000s have a mounting base for the bulb which is itself mounted in the reflector like most H1 and H3 bulbs. Id say manufacturers dont make them because they cant control the mounting base, and if they made a bulb/base combo, it certainly wouldnt fit more than a couple of styles of light. Bit of fiddling and or some judicious use of glue and you could replace the H2 assembly with a H3 with no performance loss.
.
