Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear diff torque values..... help please

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 14
Joined: Thu Dec 13, 2007 5:56 am
Location: launceston, tasmania

rear diff torque values..... help please

Post by keechox@autospeed.com »

hey guys, just reinstalling my rear diff and rather than just tightening till it feels right (my normal way) i thought i better do it right this time. the owners manual i have doesnt cover the rear dif grrrr

can anyone help me with torque settings for

diff centre case cap (bit with spider/side gears in it)
ring gear bolts
bearing cap bolts

thanks in advance

oh, its a 85 1.3 NT sierra
there is BBQ shapes floating round the cab, we ARE under water
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: rear diff torque values..... help please

Post by Guy »

keechox@autospeed.com wrote:hey guys, just reinstalling my rear diff and rather than just tightening till it feels right (my normal way) i thought i better do it right this time. the owners manual i have doesnt cover the rear dif grrrr

can anyone help me with torque settings for

diff centre case cap (bit with spider/side gears in it)
ring gear bolts
bearing cap bolts

thanks in advance

oh, its a 85 1.3 NT sierra
Do you know how to set a diff up after pulling it apart ?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

Diff case bolts 41 nm
Ring Gear 85 nm
Bearing cap bolts 85 nm

All these torques from the factory manual
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Top
Posts: 22
Joined: Fri Feb 27, 2009 1:46 pm
Location: Ipswich QLD

Post by Junior91 »

Anybody know the backlash settings for the diffs in a wt sierra?
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Dont know the settings, i just do it by feel. You only want a tiny bit of clearance between ring and pinion, so when you move ring back and fourth it clunks ever so slightly. Then use Adblue on the teeth and see if the contact is good.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 71 guests