Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

aquamist water injection

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 16
Joined: Sat Jan 10, 2009 1:38 pm
Location: perth wa

aquamist water injection

Post by 5middy »

just interested, has anyone tried or looked at adding water/methanol injection to their supercharged or turbocharged lexus v8 trucks?
What are pros and cons? reliability? known problems or potentila problems?

any advice would be much appreciated

cheers
Top
Posts: 248
Joined: Tue Mar 30, 2004 3:44 pm
Location: Sydney Australia

Post by zuffen »

I run Snow Cooling Mist on my Lexus with 22.5psi of boost.

It ran insane AIT's so I'm guessing it didn't do too much.

I started adding 50:50 water/meth at 8psi and was maxed at 375cc per minute by 15psi.

I'm currently adding a W2A intercooler that will flow 1500CFM.

I'm expecting 600plus and maybe pushing toward 700FWHP with the cooler plus some porting and a decent tune.
Cheers,

Zuffen

There's no such a thing as too much horsepower
Top
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Contact:
Contact -Nemesis-

Post by -Nemesis- »

Its on the cards, but not done yet.

There's one guy in the states I know of with it on a blown sc400, when Lextreme is back online....
Lovin the FZJ105-T, bling by Ryano
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests