The Paj's don't have a steering dampener from factory, so i am in the process of fitting one up. I've migged a bracket on the chassis and have clamped the opposite end to the drag link with u bolts and a bracket. I'm thinking though of welding a "tag" onto the drag link so there is no chance of it slipping.
What are your thoughts of welding the drag link? I was under the impression that steering components should not be exposed to heat, ie Welding/Oxy etc. Should i weld on the tag or leave it with the clamps?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Welding Drag link
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Don't do it. (weld, that is)
It *should* be fine, and I have welded steering links on offroad only cars before without a problem, but it's a massive no-no without inspection and/or approval.
clamped steering damper mounts are fine.
Steve.
It *should* be fine, and I have welded steering links on offroad only cars before without a problem, but it's a massive no-no without inspection and/or approval.
clamped steering damper mounts are fine.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 3 guests