Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

h233 5.38 gear set

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 4
Joined: Mon Jul 13, 2009 9:35 am
Location: Chandler, AZ

h233 5.38 gear set

Post by penski61 »

hey whats up guys , i posted a thread a while back about getting 5.38 gear sets made here in the U.S. , well thanks to www.ruggedrocksoffroad.com it may be a reality

steeevo should here back from richmond gears next week for a quote , depending on the price would there be any interest in these gear sets ?
Top
Posts: 94
Joined: Wed Sep 12, 2007 10:02 pm
Location: Estonia

Contact:
Contact (EST)MahviaDeTyrk

Post by (EST)MahviaDeTyrk »

Both front and rear ?
Jee I wanna them :P
Maybe 5,11 can be done too :roll:
Top
Posts: 4
Joined: Mon Jul 13, 2009 9:35 am
Location: Chandler, AZ

Post by penski61 »

5.13's already exist thru a company called www.4x4parts.com here in the U.S. , so im not sure if steeevo is goin to try and get that ratio made up

on the hb233 that you guys have are the front and rear gears interchangable or is one standard cut and the other reverse rotation ?

if they are the same then yeah both front and rear would be available
Top
Posts: 94
Joined: Wed Sep 12, 2007 10:02 pm
Location: Estonia

Contact:
Contact (EST)MahviaDeTyrk

Post by (EST)MahviaDeTyrk »

front is reverse cut - and lots are using reverse cut in rear axle too
So - better be available reverse then only standard cut :roll:
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest