Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ranuki's 'Rocky Rover'

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Ranuki's 'Rocky Rover'

Post by RANUKI »

Thought some of you might want to see the progress of the new rangie. Had to rebuild as the old girl had more hit than elvis, the right rail is i inch back of the left.

For those that havn't heard I managed to jump,,yes JUMPED a skyline. hit the boot and didn't touch the roof, got about 6m of air time .. on the ashphelt.

Eveyone was ok just a bruise ego and some ammused cop's.

Got to watch the road they recon, guess so..
Last edited by RANUKI on Fri Feb 20, 2004 2:47 am, edited 2 times in total.
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Post by RANUKI »

The new donner vehicle, poor condition but what i need is ok.
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Post by RANUKI »

the other eye,
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Post by RANUKI »

Changing the interior from 85 to 86 hi-line, the rear seat has been modified and in place, from elec windows and trims on, all the floors welded and sealed. Also lifted inner guards and cut rear door flares right up to upper lip. Have also lifted inner guards up to stop wheel rubbing.
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Post by RANUKI »

Fitting the chassis extension boxes (prototype), these keep standard bar mounts however lift the bar 65mm from standard. Good for 2 and 3 in lifts, they are straight weld on parts.
Last edited by RANUKI on Fri Feb 20, 2004 3:09 am, edited 1 time in total.
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Post by RANUKI »

Checking chassis extensions by fitting cradle.
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Post by RANUKI »

Back under the dash, Fitting the fuel injection loom, electric windows,and all the gismo's. then rip the rest out.

You can see the R380T (lt230) levers petruding through the floor with the tunnel extention still off.
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

whats that sitting above your tacho/speedo ? ? ?
Top
Posts: 207
Joined: Wed Dec 04, 2002 8:45 am
Location: Over there

Contact:
Contact Bodge

Post by Bodge »

Probably the plastic bits from the centre consol that he has removed to get to all that purty wiring....
The Lucas motto: "Get home before dark."
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

:rofl:

my bad the first time i had a quick glimse i though it had some sorta screen on it....... :rofl: but after the second good look i realised its off the dash....... :oops: :rofl:
Top
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Post by RANUKI »

Yeah, that is the AC vent piece of the dash, I do run a centre pod though. they have stoped manufacturing them but I am looking at getting it redone. Many people ask about it so I thought fark it I do them too..
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Posts: 82
Joined: Wed Sep 10, 2003 4:14 pm
Location: Sydney

Contact:
Contact Rangee

Flares

Post by Rangee »

hey can i please have a copy of all your pics, i am about to put the same set of flares on my 87 4 door RR and it is always usefull to see how it has been done before, especally the rear doors
thanks a lot

Rangee

email addy
ted@skycool.com.au
Virgins !!!
someone has to go first !
Top
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Re: Flares

Post by RANUKI »

Rangee wrote:hey can i please have a copy of all your pics, i am about to put the same set of flares on my 87 4 door RR and it is always usefull to see how it has been done before, especally the rear doors
thanks a lot

Rangee

email addy
ted@skycool.com.au


Rangee,

Check the "who wants 4 door flares" thread as I have put up photos of the flare conversion there
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 4 guests