resomat sound proofing

Post by **micktroopster** » Mon Sep 21, 2009 9:20 pm

has any one used resomat in their vehicle and was it succesfull in getting the noise level down??cheers mick

Post by **80's_delirious** » Mon Sep 21, 2009 10:37 pm

what is it made of? and how much is it?

I used 10mm foil backed closed cell foam from clark rubber, its available with self adhesive one side. It made a big difference.

Post by **micktroopster** » Tue Sep 22, 2009 8:41 am

its 2.7mm tar [black stuff] with silver backing its about 175 for 3ish square metres

Post by **Feass** » Tue Sep 22, 2009 7:53 pm

How much was the stuff from clark rubber?

Post by **80's_delirious** » Tue Sep 22, 2009 8:02 pm

I cant remember, it was a couple of years ago, I think it was around $10/m2 maybe $13/m2 for the adhesive backed one

Post by **Feass** » Tue Sep 22, 2009 8:49 pm

Yeah, cuz i have stripped the yukky vynal in my 79 cuz it was going foul due to all the shit i split in the car haha. None the less, im looking to sound proof the firewall on the engine side and soundproof the back and floor of the cab so i minimize heat and noise.

Would the clarky rubber stuff be the best?

Post by **micktroopster** » Tue Sep 22, 2009 9:00 pm

picked the resomat today will be installing it next week will give an update when its done ,cheers

Post by **micktroopster** » Mon Sep 28, 2009 3:50 pm

just finished the front and rer seat ares in the troopy took it for a drive seems heaps quieter taking it down the freeway tonight will give update later

Post by **micktroopster** » Wed Sep 30, 2009 5:36 pm

just went down the freeway its cut down the noise by about 30% works good !!!

Outer Limits 4x4 Board

resomat sound proofing

resomat sound proofing

Who is online