Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engine conversion on NH Paj

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 10
Joined: Sat Nov 26, 2005 11:18 pm

engine conversion on NH Paj

Post by gleno »

Hey am wondering if anyone has done a 3.8 comm v6 in a 3l Paj?
Top
Posts: 14
Joined: Thu Feb 14, 2008 11:48 pm
Location: South Africa

Post by kev500sa »

Hi, done a 3.8l conversion to a 3.0l. also other engine mods. cheers
Top
Posts: 56
Joined: Sun May 23, 2004 12:54 pm
Location: Ohio, USA

Post by MontyMcV »

OldColt on 4x4Wire did a 3.8 non-MIVEC into a US spec 95 SR (3.5 DOHC).
FSMs at http://www.mitsubishilinks.com
1) 00 3.5 SOHC, AT, stock for now
2) 95 LS,5-spd,3.0 24V,SR rear locker
3) 87 SWB 2.6L Turbo, I/C, 2.85s, LSD/LSD
4) 03 20th Anniv, hers, 22k miles!
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I know the motor is cheaper .. but it is not nearly the quality of the mitsu motor and you need all sorts of mucking about and adapter etc to put it in .. and its only 7Kw more than the mitsu 3.5 which is a bolt in..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 13 guests