Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pyrometer (Now Group Buy)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Pyrometer (Now Group Buy)

Post by HTH »

Hey guys, currently in the process of turboing my hilux and need to get a pyrometer so i can make sure i dont cook it.
anyone no of where i can get one? or does anyone have one they might want to sell?

Cheers, HTH
Last edited by HTH on Fri Sep 25, 2009 1:27 pm, edited 1 time in total.
95 lux, Under Construction..
60% of the time it works ALL the time
Posts: 42
Joined: Tue Jun 09, 2009 7:47 pm
Location: brisvegas

Post by ETU47 »

ebay i got a vdo boost and a pyro gauges with the kits for $295 brand new
Posts: 137
Joined: Mon Jun 09, 2008 11:05 am
Location: Gladstone

Post by one_waz »

Ebay thats where i got mine
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Post by yamaha__308 »

Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

yamaha__308 wrote:http://www.auberins.com/
Got one of these from a group buy on here at the end of last year...

Cheap, digital and has been working no problem for a while now...

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Post by HTH »

so are the digital ones suposed to be the go?
how do they read the temp? do you tape into the manifold?
cheers for the help..
95 lux, Under Construction..
60% of the time it works ALL the time
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

yeh mate they have a 'thermocouple' which depending on your dump pipe will have a plug you remove and bolt it into or (like me) you will have to drill and tap the dump pipe and install it as close as possible to the turbo (can be pre or post turbo)

Digital are alot easier to read and the auber ones have minimum and maximum limits you can set in them so it will alarm when it hits the limits you set... ie you don't want to go over 550 degrees so set low limit to 450 and high limit to 550 then you know when it is getting close and keep it off the high alarm

I have also heard of people setting a turbo timer up to these and while the truck is over a certain temp (they preset) the truck will run till below the safe shutdown temp and shut itself off....

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Posts: 446
Joined: Wed Jan 02, 2008 8:50 am
Location: Mackay, Sunshine State

Post by clm434 »

brad 93hilux wrote:yeh mate they have a 'thermocouple' which depending on your dump pipe will have a plug you remove and bolt it into or (like me) you will have to drill and tap the dump pipe and install it as close as possible to the turbo (can be pre or post turbo)

Digital are alot easier to read and the auber ones have minimum and maximum limits you can set in them so it will alarm when it hits the limits you set... ie you don't want to go over 550 degrees so set low limit to 450 and high limit to 550 then you know when it is getting close and keep it off the high alarm

I have also heard of people setting a turbo timer up to these and while the truck is over a certain temp (they preset) the truck will run till below the safe shutdown temp and shut itself off....

Brad
Any details on this turbo timer/egt setup?
[quote="Ruffy"]P.S. woober woober is a technical term describing the audible tone emitted from harmonic air vibration.[/quote]

F/S Holden V6 auto to Mitsu kit incl exhaust for Triton conversion.
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

clm434 wrote:
brad 93hilux wrote:yeh mate they have a 'thermocouple' which depending on your dump pipe will have a plug you remove and bolt it into or (like me) you will have to drill and tap the dump pipe and install it as close as possible to the turbo (can be pre or post turbo)

Digital are alot easier to read and the auber ones have minimum and maximum limits you can set in them so it will alarm when it hits the limits you set... ie you don't want to go over 550 degrees so set low limit to 450 and high limit to 550 then you know when it is getting close and keep it off the high alarm

I have also heard of people setting a turbo timer up to these and while the truck is over a certain temp (they preset) the truck will run till below the safe shutdown temp and shut itself off....

Brad
Any details on this turbo timer/egt setup?
no but if you hit that auber ins site you can see that these things have the ability to control alot of external functions the pyro finction is just 1.

i organised the group buy last time and now that the dollar is up again it could be worth doing again - i need a new probe so i would buy in. and am happy to organise it again if wanted. we saved about 20% last time the whole kit with the bigger probe and delivery was $100-120 from memory.

yeah hth tap into manifold or dump pipe. mine already had a tap in the dump top suit the thread for the probe so mine is in there.

ideally you go in the manifold pre turbo as its a bit more accurate. you opperate off different parameters here as well i.e say 750 max if in manifold or 550 max if in dump pipe.

most have it in the dump because its easier to not remove turbo etc to do it, but if you havent fitted yours yet, tap the manifold before fitting it and just screw a bolt into it until the time comes to fit your probe.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Post by HTH »

thanks for the info!!!

let me no if you or someone is organising a group buy cause ill be in for sure. otherwise have to pay a little extra when i need it.

once again, thanks.
95 lux, Under Construction..
60% of the time it works ALL the time
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

change the title to group buy and see how many are interested. we need groups of 10 from memory.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Post by joshy »

i need a new probe aswell as nissan broke mine :roll:
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

clm434 wrote:
brad 93hilux wrote:yeh mate they have a 'thermocouple' which depending on your dump pipe will have a plug you remove and bolt it into or (like me) you will have to drill and tap the dump pipe and install it as close as possible to the turbo (can be pre or post turbo)

Digital are alot easier to read and the auber ones have minimum and maximum limits you can set in them so it will alarm when it hits the limits you set... ie you don't want to go over 550 degrees so set low limit to 450 and high limit to 550 then you know when it is getting close and keep it off the high alarm

I have also heard of people setting a turbo timer up to these and while the truck is over a certain temp (they preset) the truck will run till below the safe shutdown temp and shut itself off....

Brad
Any details on this turbo timer/egt setup?
Nah there was someone on outers thats did it as i bought mine in the last group buy and i read about some one doing this.

The good thing about this brand is even if you pay full price they are still heaps cheaper then a kit you buy from a auto store.. and they look good, in either orange display or green (from memory)

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

i'm in for a group buy if its happening!

oops to late, $120 ebay
Last edited by 6.5 rangie on Wed Sep 23, 2009 11:26 pm, edited 1 time in total.
Damien


--------------------------------------------------------
Posts: 79
Joined: Tue Jun 19, 2007 9:52 pm
Location: Darwin

Post by 4runnernomore »

I would be interested as well
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

6.5 rangie wrote:i'm in for a group buy if its happening!

oops to late, $120 ebay
thats the other side of it its only like $120 direct or say $100 in a groupie so not earth shattering but it all helps i guess.

red or green by the way, the green was like $10 more.

make sure if you buy direct you get the longer probe. not the el cheapo version.

elcheapo: http://www.auberins.com/index.php?main_ ... ducts_id=6

this is what we all got last time.
http://www.auberins.com/index.php?main_ ... ucts_id=69

pretty good for a 3 inch dump.

this would also be good, but not being a L shape might foul on bonnets etc.
http://www.auberins.com/index.php?main_ ... cts_id=108

but note the different threads on the probes... eg mine already has thread to suit the L shaped one which is 1/8npt, while the others are 1/4 npt.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

i got red, and the k type npt probe, got the good one not the cheapy
Damien


--------------------------------------------------------
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

ill keep a list in case we get the numbers,

joshy - probe
thehanko - probe
hth - kit
4runner no more - kit
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 169
Joined: Thu May 15, 2008 3:42 pm
Location: Central Coast, NSW, Australia

Post by SLASH »

Hi guys, im keen for the group buy. Cheers Loz.
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

thehanko wrote:ill keep a list in case we get the numbers,

joshy - probe
thehanko - probe
hth - kit
4runner no more - kit
Slash - Kit
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 141
Joined: Thu Aug 23, 2007 5:00 pm
Location: Rockhampton

Post by horndog »

I'm in for the kit, red n long probe if it happens
Posts: 288
Joined: Sat Mar 18, 2006 4:30 pm
Location: Darwin

Post by jsttry »

i have the red setup, interested in swapping and paying the difference if someone wants to order a green and swap for my red one (ordered as part of hanko's first group buy)
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

Post by rumpig89 »

im in for a group buy if its gunna happpen... was just about to order - shopping cart opened and all!!

i decided i needed one just after the last group buy happened :lol:

i want digital readout and long probe.
Readout - Model: the green one as long as it dims
Probe - long probe

*** hanko what was the fault with the probe on yours? just broke capilliary??***
Last edited by rumpig89 on Thu Sep 24, 2009 9:52 pm, edited 1 time in total.
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

Post by rumpig89 »

thehanko wrote: this would also be good, but not being a L shape might foul on bonnets etc.
http://www.auberins.com/index.php?main_ ... cts_id=108

but note the different threads on the probes... eg mine already has thread to suit the L shaped one which is 1/8npt, while the others are 1/4 npt.
that one is only good til 400C i think
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

thehanko wrote:
thehanko wrote:ill keep a list in case we get the numbers,

joshy - probe
thehanko - probe
hth - green kit
4runner no more - kit
Slash - green Kit
horndog - green kit
rumpig89 - green kit
xr393 - green kit
Last edited by thehanko on Sat Sep 26, 2009 10:01 am, edited 2 times in total.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

rumpig89 wrote: *** hanko what was the fault with the probe on yours? just broke capilliary??***
nop idea, the read out had been very precise and responsive then temps started going off the charts like 1300deg then 100 deg the error code then 800 deg etc.

contacted the auber guy and he said its most likely the probe, you can test them by arcing out the two terminals that the probe attaches too, if it reads an ambient temp then the unit itself is fine and the probe is the issue.

been meaning to get a new one for a while but have been lasy :lol:

any one on the list ive written, please specify if you want red or green face. I would recommend that all go for the probe used last time as its nice and long and as rum pig mentioned the other probe might not be suitable 400c+
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Post by HTH »

green kit with the long probe..

Cheers
95 lux, Under Construction..
60% of the time it works ALL the time
Posts: 169
Joined: Thu May 15, 2008 3:42 pm
Location: Central Coast, NSW, Australia

Post by SLASH »

Green for me please mate and long probe. Thanx Hanko. Cheers Loz.
Posts: 17
Joined: Mon Mar 03, 2008 5:11 am
Location: W.A

Post by xr393 »

I'll be in for a green display and long probe. Meant to get one last time but got side tracked.
Posts: 141
Joined: Thu Aug 23, 2007 5:00 pm
Location: Rockhampton

Post by horndog »

thehanko i been looking at their website and id like ta change my order to a green, looks a bit easier to read n will suit my dash lights
cheers
Post Reply

Who is online

Users browsing this forum: No registered users and 113 guests