Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

removal of speedo gear from sierra Tcase

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

removal of speedo gear from sierra Tcase

Post by lump_a_charcoal »

Halp!

I cannot get the speedo gear unit out of the transfer case, I think the gear is a bit munted as the main cluster turns, but the gear shaft doesn't....

I removed the retaining screw, but no matter how tight I grip the sleeve, I cannot get it to budge. I have already had one case destroyed, I don't need another fucked.

I have access to bugger all equipment, but may have some gear at work that I can use...
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

Mate I pulled mine out a little while back and I had the same issue but I can't remember for the life of me how I managed to get it out. Double check that there isn't a nut also holding the unit into place as well. I vaguely remember that it was something stupidly obvious.
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Everything has been removed that needs to be - I think the shaft might be bent or something...
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

i used to grip them with lockgrips and then smack those outward with a hammer.. it worked everytime.

cheers mark.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

mud4b wrote:i used to grip them with lockgrips and then smack those outward with a hammer.. it worked everytime.

cheers mark.
Yep that did the trick.
Top
Posts: 40
Joined: Mon Jan 30, 2006 4:20 pm
Location: New Zealand

Post by jazuki »

I ended up having to use a slide hammer with a special end that griped the inside of the speedo gear unit and apply a little heat to get mine out .
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests