Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing Windscreens (hilux)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Removing Windscreens (hilux)

Post by HTH »

Im getting ready to re-spray my hilux and theres a little bit of rust under the rubber trims around the front and rear windscreens.

I've never removed windows before and was just wondering if anyone had any tips or pictures that could help in this process?

Cheers, HTH
95 lux, Under Construction..
60% of the time it works ALL the time
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

BFH :D
I am Tim
Posts: 502
Joined: Wed May 02, 2007 3:29 pm
Location: Brackenridge...Boondall at heart

Post by Rory »

the hilux in ur display pic? pull ur dash out and get some rope, bout 8mm or so round, pri up the rubber from the windscreen surround and put the rope under there,the rubber will now be sitting off the surround.
Once u have done this all the way around, grab a mate to hold the windscreen in from the outside while u push it out from the inside.
Start in a corner and slowly work ur way around, it ill evently just pop out,(hopefully against ur freinds hands so it doesnt drop! ).
If u have any small cracks or chips in ur window, u have to be super carfull as it will MOST likely crack.
U can repeat the same to put the window back in, rope under the rubber, sit it back in the surround and have a mate push on the edge of the window as u slowly pull the rope out.
Boondall backyard performance...SHANTYTECH 4034...
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

I was amazed how easily a mate pushed out my GQ front screen
when doing similar rust repairs :oops:

the windscreen guy put the new one in :D

cheers
JB
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Post by HTH »

sounds like a mish..

thanks for the quick replies

i got some thinking to do
95 lux, Under Construction..
60% of the time it works ALL the time
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

Image

:D
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Two size 13's does it for me.. Haven't broken one while removing yet.
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

hiluxmad wrote:Image

:D
Dammit you beat me to it lol
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

want33s wrote:Two size 13's does it for me.. Haven't broken one while removing yet.
a second later when it slides down the bonnet, thru the bullbar and onto the ground... thats when it breaks :finger:
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

I have to do this at some stage as well.

I removed the rear window of a lux no problems just by pushing the rubber lip from the inside to the out starting in the corner and working my way around with a mate on the outside to hold it.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

macca81 wrote:
want33s wrote:Two size 13's does it for me.. Haven't broken one while removing yet.
a second later when it slides down the bonnet, thru the bullbar and onto the ground... thats when it breaks :finger:
That's where a blanket on the bonnet comes in or a mate to catch it.
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

if yah got NRMA insurance just pay the little extra for windscreen coverage and take it out with a hammer!
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests