Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Window net mounting

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 214
Joined: Mon Jan 21, 2008 11:04 am
Location: NEWCASTLE

Window net mounting

Post by HANCOCK »

Hi, I’m going to do some comps this year so I need to get some window nets mounted. I am interested in going in tuff truck and have read in the rules that they are no longer allowed to be on the door but on the cab. So just after some advice on how to go about it as I have no internal roll bars? Any suggestions and pic’s would be great keeping in mind they need to be fast and easy to secure.

Thanks Hancock
TEAM TONKA

SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Do you mind drilling holes? You might be able to use the presstuds that you can rivet into the body?
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

PJ.zook wrote:Do you mind drilling holes?
he is talkin of entering tuff truck, drillin a few holes are the least of his panel worries to come ;)
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

bogged wrote:
PJ.zook wrote:Do you mind drilling holes?
he is talkin of entering tuff truck, drillin a few holes are the least of his panel worries to come ;)
Quit drilling holes in my logic!
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

ummm would have thought a roll bar would be mandatory for tufftruck?
Spit my last breath
Top
Posts: 214
Joined: Mon Jan 21, 2008 11:04 am
Location: NEWCASTLE

Post by HANCOCK »

bogged wrote:
PJ.zook wrote:Do you mind drilling holes?
he is talkin of entering tuff truck, drillin a few holes are the least of his panel worries to come ;)
That's about right. There is no worry's modifying the cab to suit, holes or brackets whatever just need something practical ;) Its a FJ73 ute.
TEAM TONKA

SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

bad_religion_au wrote:ummm would have thought a roll bar would be mandatory for tufftruck?
x eleventy
Top
Posts: 214
Joined: Mon Jan 21, 2008 11:04 am
Location: NEWCASTLE

Post by HANCOCK »

bogged wrote:
bad_religion_au wrote:ummm would have thought a roll bar would be mandatory for tufftruck?
x eleventy
I mean it has not got an internal roll cage but will have a full exo cage built. As here is no room or need for an internal one if the exo is built properly. ;)
So i'm after pillar mounting idea's please. :?:
TEAM TONKA

SPONSORED BY
HANCOCK SHEETMETAL
Locktup4x4.com.au
FOR ALL HARDCORE OFFROAD GEAR
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests