Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HELP g16 welch plug removal

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 19
Joined: Mon Apr 23, 2007 9:45 pm
Location: south coast

HELP g16 welch plug removal

Post by bobzuki »

having problem removing welch plug on exhaust side at front on g16 efi it has a hole in the centre someone had filled it with that tube of steel crap have it out but cant get plug out
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

I haven't done it on a g series engine but I did change them on a wrangler recently. I just knocked them in with a small punch in the middle. I then just reached in with pliers and pulled them out.
Sierra
2 inch RUF
G16A
Megasquirt Injection
30 inch BFGs
Vit P/S
4.9 T/C gears
Hilux Project = Dead
Top
Posts: 19
Joined: Mon Apr 23, 2007 9:45 pm
Location: south coast

Post by bobzuki »

THANKS HYBRID that was the way they should come out but some incompetent diy;er bodged it up bashed it in too far and sealed the leak with liqid steel what a mess i got around the problem with a home made tool 10mmx10mm angle about 2 ft long(too reach under guard on left side )cut a taper to end of angle then bent it over to make a 10mm long hook and 4mm wide then slide hammered it out 15mins me done thanks again
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 23 guests