Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Nissan newby

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 33
Joined: Tue Oct 14, 2008 12:22 am
Location: Sydney

Nissan newby

Post by AussieJK »

hey guys,

after owning 2 jeep wranglers, and got sick of breaking the heaps, i decided to buy a 1988 nissan SWB patrol off a fellow member of this site. It has currently got 33' tyres and 3'' lift kit. So i hope this patrols are just as much fun as modding Jeeps but with out the breakages, and expensive parts... For now the plan is to get lockers and 37's under it... possibly a engine conversion using a RB26dett, with single turbo conversion...

will get some pic's up soon as i get some and will start a build up page also as this will be a on going project which will go from what it is now to pretty much a comp spec monster...
Top
Posts: 164
Joined: Mon May 25, 2009 10:51 am
Location: Woodford, Queensland

Post by Davo812 »

with that amount under it it will be on its side or roff half the time geez you game mate
1989 TD42 GQ Patrol soon to be a 4 seater dual cab
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Davo812 wrote:with that amount under it it will be on its side or roff half the time geez you game mate
will be fine as long as he widens the track, and doesnt feel like he needs a 40ft lift in it.
Top
Posts: 33
Joined: Tue Oct 14, 2008 12:22 am
Location: Sydney

Post by AussieJK »

I am going to try and keep it as low as possible, coming from a Jeep wrangler running 35's with just a small amount of lift, im use to having a low centre of gravity, and the power from the RB26 will mainly be for road use, as for offroad use the gearing should tame down the power as i dnt plan on reving the engine all that much offroad after all thats wat reduction gears are for LOL... just wanna do something bit different... :D to go along futher with mods i will be streching the wheel base in the rear about 200mm and front will move forward about 50mm...
rear strech wont happen to the body gets the cut off...
Last edited by AussieJK on Thu Oct 08, 2009 10:10 am, edited 1 time in total.
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

bogged wrote:
Davo812 wrote:with that amount under it it will be on its side or roff half the time geez you game mate
will be fine as long as he widens the track, and doesnt feel like he needs a 40ft lift in it.
x2, get some good offset, and it will be fine.

rb26 hard to get hold of these days?
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 33
Joined: Tue Oct 14, 2008 12:22 am
Location: Sydney

Post by AussieJK »

Rb26's are easy to get ahold of, just got to now were to look :D
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 13 guests