Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

axle spline difference in gq/gu patrols

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 41
Joined: Wed Jan 09, 2008 6:22 pm
Location: Tuggerah

axle spline difference in gq/gu patrols

Post by Boodge »

hey i have a gu front airlocker i wanted to fit into my gq but the axle count is different, does anyone know if u can do a axle swap or anything or do i have to get the gu front housing

any help would be much appreciated

cheers
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

I was always under the impression that they where the same. Only real difference is the GU axle is 70mm wider.
THOUGHT FOR THE DAY....
Top
Posts: 309
Joined: Tue Dec 03, 2002 11:43 am
Location: SOMEWHERE IN VICTORIA

Post by TUFF MAV »

turps wrote:I was always under the impression that they where the same. Only real difference is the GU axle is 70mm wider.
There is no difference as Turps said.
BUGGERED IT'S A TOYOTA THING
Top
Posts: 41
Joined: Wed Jan 09, 2008 6:22 pm
Location: Tuggerah

Post by Boodge »

i thought the same to but the axle definatly is spinning in the centre

the gu centre is out of a gu 3 i think. it was about an 06/07 model i think
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

you may have a rear 33 spline locker and putting in the front where there are 31 spline axles, front and back lockers are the same except the side gears.
[quote="75 cruser"]we want more donkey[/quote]
Top
Posts: 41
Joined: Wed Jan 09, 2008 6:22 pm
Location: Tuggerah

Post by Boodge »

its definatly a front i pulled it out myself. got me buggered ay lol ohwell ill jus have to pull it back out an have a look at wats goin on. might jus end up running front an rear gu housings
Top
Posts: 186
Joined: Sat May 09, 2009 11:11 am
Location: gold coast

Post by RED24 »

interesting this comes up now
on the weekend mate done a hub on gq that has gu diffs i hade a spare gq hub and it did not fit the spline was the same count but the shaft hade a bigger diameter so the hub from my gq did not fit the gu cv
i would imagin your axles are to small for the front centre
GQ PATROL 4.2 turbo diesel with bars
Top
Posts: 41
Joined: Wed Jan 09, 2008 6:22 pm
Location: Tuggerah

Post by Boodge »

yeh thats wat im thinkin mate but ive done it before an had no problems but ive never used a centre out of such a late model gu. maybe they changed i dunno. very annoyin but cause i was so keen to go wheelin this weekend lol
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

Ill give you 400 for it
hands and mums dont count!!!
Top
Posts: 41
Joined: Wed Jan 09, 2008 6:22 pm
Location: Tuggerah

Post by Boodge »

lol u can have the old open centre for that.
Top
Posts: 41
Joined: Wed Jan 09, 2008 6:22 pm
Location: Tuggerah

Post by Boodge »

ok seems i found the problem

the spline on the cv shaft is slipping it sheered most of the teeth off it lol
i thought the cv would of broke before that happened
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

10 to 1 its bust the C/V , they crack the spider and the slip on the shaft.
Living the dream on the hill that floods
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

RED24 wrote:interesting this comes up now
on the weekend mate done a hub on gq that has gu diffs i hade a spare gq hub and it did not fit the spline was the same count but the shaft hade a bigger diameter so the hub from my gq did not fit the gu cv
i would imagin your axles are to small for the front centre
not real sure on this but i was under the impression that the GQ leafy utes FWH may fit the GU CV's ???
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 56 guests