Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

vitara block sierra head

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 45
Joined: Tue Apr 08, 2008 10:02 pm
Location: Beaudesert

vitara block sierra head

Post by Beauzooki »

does any one kno or can point me in the right directions about putting a sierra head on a vitara block, is this possible, what kinda power/torque differences, pros and cons and fuel i got to run. thanks, Josh
Top
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}

Post by Santos »

yes, smaller exhaust valves and slightly less cam, small fuel pump , slight loss in compression too (guy on zuwharie forum measured 33cc head chamber for 1.3l and 32cc for the 1.6l)

i am guessing it may hurt your top end.

i got a 1.6l rebuilt head without a cam for sale(less than 100kms before the owner rebalaced the whole engine, block was shot)

you can use the cam from 1.3l in a 1.6l head (or take the opputurnity to put an aftermarket cam)
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

I sold my old 1.6 block in the old Vit when the head crapped itself. Got $350 for it from memory. The dude had a Sierra head to go on it and apparently they bolt on OK.

Joeblow should be able to give you all the tech on it...
bru21 wrote:What happens in goat, stays in goat!
Top
Posts: 48
Joined: Sat Jul 25, 2009 1:55 am
Location: sale

Post by chester_390 »

wat about a twin cam head on a 1.6? or would that not work?
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

im running the jimny top end on vit 1.6 carby bottom end with the vitara injectors with no hassles... and it got TONS of torque.
The worst thing about censorship is ███████.
Top
Posts: 23
Joined: Sun Oct 01, 2006 6:27 pm
Location: ballina nsw

Post by 4wheeljive »

ive seen the g13b head on the 1.6 a few times so you can do it. but i dont know much about it
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 8 guests