Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Are you legally allowed to weld barwork to your chassis, for example sliders and tube tray (QLD).
I was of the belief that anything attached to a chassis has to be bolted, but this is coming from a truck body building background.
Yet i see lots of trucks with the exo/tray/rear bar/sliders welded straight to the chassis (suitably reinforced, obviously).
Does anyone know the rules in regard to this?
[quote="rockcrawler31"]And it's spelt "thanks" you mobile phone using, english mangling Gen Y fawktard.[/quote]
yep youv got it right not legaly allowed to weld to chassie all must bolt on yes all alot of ppl do weld to the chassie but is illegal. I went out and forked out the cash 60 bucks to get the qland tranport mod gid lines book or you can print it off there site.
weld crush tube inside the chassis and bolt through it with plates each side - itll be strong as and you can replace it easily if you smash the bar work.
