Anyone know what size socket is required for the front hub nut?
Or if it is indeed a nut, looking at the workshop manual it looks like a ring with holes in it, which might require a special tool.
Can anyone shed some light before I start stripping it down.
Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Front hub nut size R9 Rodeo 4WD.
Moderator: Moderators
they have 3 Philips head screws in them, you might need an impact driver to get them as they are usually tight, or just give em a tap with a pin punch before undoing.
Go hard or go home!!!
MU build here
MU build here
Who is online
Users browsing this forum: No registered users and 13 guests