Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MK V8 conversion

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 19
Joined: Mon Oct 12, 2009 11:05 am
Location: Melbourne

MK V8 conversion

Post by pipebender »

Have MK petrol 4 speed want to fit chev and diesel 5 speed, can i use the existing gearbox mounts ( tailshafts etc) and just modify the engine mounts
Top
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

Post by Sterlo »

The stick is a lot further forward on the 5 speed than the 4sp box. You can swap the tops around with a little buggering around. If you put the 5 sp in the g/box will be round 100mm further forward from memory. This puts the gear stick up under the heater box.
Do a search very helpful. From my experiance just put the box where it should be, make up some new shafts and mod some mounts.
Top
Posts: 19
Joined: Mon Oct 12, 2009 11:05 am
Location: Melbourne

Post by pipebender »

Thanks for the info, but if i move the box back on new mounts the rocker covers of the chevy will be to close to the firewall.
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Post by shortyq »

how close is to close?
mods encounter you to get the grinder out and make it fit
such in this case!
Top
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

Post by Sterlo »

Use the L28 input shaft and order your adapter kit to suit an L28 petrol, this should bring the motor forward from memory. But yes i do remember always having rocker cover clearance issues when going from SD33 or P40 to V8
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests