Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

noise when driving.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 396
Joined: Wed Apr 05, 2006 9:51 pm
Location: Brisbane

noise when driving.

Post by CHIEF88 »

Hi I originally posted in Toyota Tech but wondering if anyone had any different ideas for me?
http://www.outerlimits4x4.com/ftopic188975.php
Hi,

Car is an 87 Hilux d/c. 4y-c

Recently in the last month or so my car has developed a pinging noise when accelerating.
At idle and when backing off the accelerator at any speed the noise is non-existent.
It is the same noise that the car makes when in a gear too high for a hill, if that makes sense lol.
Since developing the noise I have changed petrol stations and changed to premium for multiple tank fulls.
I have also changed the oil and oil filter.
I checked the timing and my manual says that the timing should be 4degrees at idle. It was at roughly 14degrees. I have moved the timing back to 4degrees but the noise if anything seems more prominent. :(
(Could it have been moved to a higher degree for a reason ?)
There is also vacuum pressure in the little emissions hoses, I don't really understand the hoses and their purpose so that wasn't a thorough test.

Does anyone have any suggestions as to the cause of this noise?

I have tightened the air box and checked the engine mounts.
To make things more confusing to me with a passenger in the front the noise is quieter.

What am I missing guys? HALP ME!!

thanks.
[url=http://s190.photobucket.com/albums/z139/chief88_2007/][img]http://i190.photobucket.com/albums/z139/chief88_2007/yellowOLsigsmall.png[/img][/url]
[url=http://www.vsnrypictures.com]VSNRY PICTURES[/url]
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

IF it is indeed pinging( pre ignititing) from your engine and adjusting the timing has altered it sounds like you need to do a road tune for the timing. Find 1 hill where it does it and do multiple runs adjusting the dizzy as you go to find the spot where it stops.

Maybe sort out your vaccum first. Its prob for vacuum advance of timing. a road tune will get you sorted in the meantime and help eliminate probs
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

Does it have a harmonic Balancer rather than just a pulley?

Some of them did, they can slip giving you an incorrect timing reading.

Get it on TDC firin on #1 & check this first.


If all is OK then it may be really carboned up, 4YC's are renouned for this. Do an upper cylinder clean.

It may also be running lean, this can cause the same issue.

Does it run on when switched off?

The 4YC carbies are crap & tend to give a lot of lean run/idling/flooding issues.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

4y

Post by DR Frankenstine »

I recon you have a vaccum leak and its causing it to run lean.
Remember some days your the pigeon and other days your the statue
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest