putting coilovers in a fourby

[Wambat]

hey guys,

i have had a bit of a search, but the info i want eludes me( i know poor effort),

i want a bit more technical information on whats involved in putting coil overs in a fourby (use my 75 for example) if i were to get a front and rear 80 series diffs, and want to put coil overs on it how would i go about it? how do you set up the hoops to attach the shock to, IE half travel, or set at 1/3rd up travel 2/3rds left for down travel?

how do you set up the control arms, 3 link or 4 link rear, or triangulated.

if you wanted to gain only 2 inches in ride height, and move the front diff forward an inch or two. how would you go about it

i have a few basic ideas, but none enough to properly think it through and think about heading down this path eventually.

hope i haven't made my questions to complicated i have a habit of that(i understand them so i don't usually notice)

thanks guys, any help, even pointing me in the way of books would be great.

Alistair

[AFeral]

check out this thread may give you some ideas.

http://www.outerlimits4x4.com/ftopic115042.php

You have ask a lot of questions that would require a large answer.

for info on coil overs read this first

www.pirate4x4.com/tech/billavista/coilovers/Part_1/

for info on links read this.

http://www.4x4.hr/2007/index.php?option ... 9&Itemid=9

After reading this lot you wil probally have lot better idea and even more questions. Good luck