Just wondering if anyone can explain the actual benefits of running an air tank, over just a compressor alone.
Reason being, i may have access to an air tank for nothing and trying to work out if its worth fitting or not. Tank is approx 8-9 litres.
Im using a standard compressor at the moment (twin piston, no built in tank) but am thinking about getting an Arb (has small built in tank) to replace it, so i can run lockers in the future.
Main uses of the compressor will be tyre inflation, and air locker/s.
Would it be too much to ask of the arb compressor and tank to run a small rattle gun for wheel changes?
Now some more questions...
If i decide to go with the ARB and the seperate tank, what is the best way to connect the 2. Can the air tank just be connected directly to the arbs small tank, so its just as though the arb has a massive tank?
so charge the tank once, and use the air locker a crap load of times before switching the compressor back on....?
If not, then which way is reccomended?
Mike
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What are the benefits of an air tank? Also, how to connect?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Master of my own domain
it should just be enough to do your wheel nuts, idea is for the tank to fill the first tyre or so and allow the compressor to play catch up. just finished plumbing my new boss grande big mofo compressor to my 9L tank, its a shame i dont have more room for the 15L as it would be better suited
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
;
A 9l air tank makes stuff all difference to tyre inflation speed. (maybe 10 seconds)
Remember some days your the pigeon and other days your the statue
depends on how fast your pump is. if your pump is getting near max flow that the tire valve will flow then tank won't make it quicker.
but if you have a slow pump then the tank will be quicker.....till it empties.
just remember that a lot of the cheap pumps don't like pumping up to high pressures and for a tank you really need to pump up as high as you can.
but if you have a slow pump then the tank will be quicker.....till it empties.
just remember that a lot of the cheap pumps don't like pumping up to high pressures and for a tank you really need to pump up as high as you can.
tank
but if you have a slow pump then the tank will be quicker.....till it empties
Correct in about 10 seconds
Correct in about 10 seconds
Remember some days your the pigeon and other days your the statue
Master of my own domain
And is this also the case for the ARB compressor... which has its own tank?Simonc3 wrote:It keeps the pressure off the head of the compressor so it makes it easyer for the compressor to startmike_nofx wrote:Why?11_evl wrote: you will need to run a one-way valve between compressor and tank.
Mike
It should therefore be designed to handle tank back pressure... should it not? all you would be doing is increasing the ARB's tank by about 8.5L.
And tank volume shouldnt matter, only pressure.
Mike
Master of my own domain
Well, unless your ARB is in your cab, how do you knew its not cycling anyhow? Mine sits under my seat in the GU, and cycles roughly once every 30 minutes, for about 1-2 secs. With the check valve fitted between tank and compressor, and yes, I have checked all the connections for leaks, its obvious that pressure does backflow through the compressor, even in a brand new comp.
Mud makes excellent toothpaste.
I bet you will find that size tank wont be big enough to run a rattle gun for long, rattle guns need a large volume of air and although it would run ok for the first few wheels...doubt it would do them all...
For this you need either a large tank or endless air type compressor (a/c)
Brad
For this you need either a large tank or endless air type compressor (a/c)
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
You will easily hear the compressor if mounted in the engine bay. My old series one certainly could and I ran with a mate the other day that had the new gen one in his 75 series ute and same you could hear it cycle in about the same time frame with rear locker activated continuously.BundyRumandCoke wrote:Well, unless your ARB is in your cab, how do you knew its not cycling anyhow? Mine sits under my seat in the GU, and cycles roughly once every 30 minutes, for about 1-2 secs. With the check valve fitted between tank and compressor, and yes, I have checked all the connections for leaks, its obvious that pressure does backflow through the compressor, even in a brand new comp.
Who is online
Users browsing this forum: No registered users and 1 guest