Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

body conversion

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 33
Joined: Tue Jun 23, 2009 8:46 pm
Location: SA

body conversion

Post by Tonka tuff 4x4 »

ok, i know this is proberly a huge project and a silly quetion, i love my xc fords and my 4x4, (have both) would the body of a 79 xc ford fit onto the 84-88 hilux chassis, i am not the best in modifing stuff as yet,has anyone done this or seen this done, i knolw the xy came out 4wd, any help or suggestions would be much appreciated
cheers trav
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Re: body conversion

Post by shakes »

Tonka tuff 4x4 wrote:ok, i know this is proberly a huge project and a silly quetion, i love my xc fords and my 4x4, (have both) would the body of a 79 xc ford fit onto the 84-88 hilux chassis,
yes anything is possible
Tonka tuff 4x4 wrote: i am not the best in modifing stuff as yet
probably best to keep it on the backburner until your a little more confident so you dont lose out too much on coin and time.
Top
Posts: 33
Joined: Tue Jun 23, 2009 8:46 pm
Location: SA

Post by Tonka tuff 4x4 »

yeah i was thinkin that,
but text screws, grinder and a welder anything can be done and a couple of cartons
Top
Posts: 30
Joined: Wed Oct 07, 2009 6:05 am
Location: Vic

Post by FRLS4B »

definately on the afterburner^
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

is it school holidays still ? :popcorn:
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 33
Joined: Tue Jun 23, 2009 8:46 pm
Location: SA

Post by Tonka tuff 4x4 »

yep. there is always time forlearning :P
Top
User avatar
DUDELUX
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Post by DUDELUX »

id busing a gq patrol as the base for anything like that, coils are a far better ride than leafs
MrsForby wrote: Oh I desperately truly love the taco.
Top
Posts: 33
Joined: Tue Jun 23, 2009 8:46 pm
Location: SA

Post by Tonka tuff 4x4 »

gq body you reckon,
thanks for the suggestion still doing a bit of research
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

Tonka tuff 4x4 wrote:gq body you reckon,
thanks for the suggestion still doing a bit of research
yep especially if you are going to use a gq body to swap a xc body onto
Ransom note = demand + collage
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

dont forget to switch off the flux capacitor before you do any welding though!
The worst thing about censorship is ███████.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests