Hey Guys,
has ony one done gq diffs under there zuk?
going to do it but hoping to see some other ideas.
thinking about using the gq control arms on the front with air shock (no rego on it) and leaving the leaf springs in the back.
any pics ect would be good
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gq Diffs
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
I know of a couple of cars that have been built with GQ diffs, but they were running 38" tyres +
Personally, I'd run a mile from GQ front radius arms - the front of GQ's can't flex with stock arms - there's no way a sierra will flex them.
As for leaf rear - you're already going in for a lot of work - trying to control axlewrap with such a heavy diff and such a light car on top (meaning a very low spring rate) will be a nightmare. I'd be looking at using those front GQ radius arms in the rear to increase roll stiffness , or maybe Range Rover arms - they are better designed.
In any case GQ diffs are very heavy and very wide, and will massively reduce your ground clearance (especially with radius arms under the front too) They are strong, for sure, but they're also designed for carrying lots of weight, and that's not required in a sierra.
Personally, if you want big diffs under a sierra with coils, I'd be using range rover diffs with 4.7 gearsets in them. They are about the same width, have better suspension design, much smaller pumpkins, are lighter, and also quite cheap.
Just my 2C.
Steve.
Personally, I'd run a mile from GQ front radius arms - the front of GQ's can't flex with stock arms - there's no way a sierra will flex them.
As for leaf rear - you're already going in for a lot of work - trying to control axlewrap with such a heavy diff and such a light car on top (meaning a very low spring rate) will be a nightmare. I'd be looking at using those front GQ radius arms in the rear to increase roll stiffness , or maybe Range Rover arms - they are better designed.
In any case GQ diffs are very heavy and very wide, and will massively reduce your ground clearance (especially with radius arms under the front too) They are strong, for sure, but they're also designed for carrying lots of weight, and that's not required in a sierra.
Personally, if you want big diffs under a sierra with coils, I'd be using range rover diffs with 4.7 gearsets in them. They are about the same width, have better suspension design, much smaller pumpkins, are lighter, and also quite cheap.
Just my 2C.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
they are all good points.
I have a gq already and can get good flex out of the front. Flex isnt everything but. Locker make life easy with out flex.
As for price I got front diff for $150 and rear for nicks so cant complain there. hence why using these.
thanks for the input but appricated.
I have a gq already and can get good flex out of the front. Flex isnt everything but. Locker make life easy with out flex.
As for price I got front diff for $150 and rear for nicks so cant complain there. hence why using these.
thanks for the input but appricated.
get under it
Who is online
Users browsing this forum: No registered users and 67 guests