Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gear ratios on hilux with 32s?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 15
Joined: Tue Oct 13, 2009 4:15 pm
Location: bathurst

gear ratios on hilux with 32s?

Post by Ray_215 »

Hey guys, was just thinking of putting some 32s on my 92 hilux but i just dont know if the ratios would be ok to turn the bigger tyres (tyres at the moment are 30s). As you all know it is a 2.8 lt diesel. only mods are pacemaker extractors and straight through exhaust. As i said if i put 32s on it, would i have to change the gear ratio or diff ratios or would the stock ratios do fine??
Top
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

Post by Kingston_99 »

i got a 99 singal cab with 2 inch lift and runing 32's with stock diff ratio's. mine goes pritty good, didnt notice much of a difference.
Top
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

Post by Kingston_99 »

also my tires srub on full lock when flexed with a 2 inch lift, need a body lift in mine. not sure about urs as its older and i asume soild axcel front
Top
Posts: 15
Joined: Tue Oct 13, 2009 4:15 pm
Location: bathurst

Post by Ray_215 »

Kingston_99 wrote:also my tires srub on full lock when flexed with a 2 inch lift, need a body lift in mine. not sure about urs as its older and i asume soild axcel front
Cheers mate. yea mine is solid axle. Some of the blokes said it wont scrub, or it will but wont be much. So i am not sure yet. Atleast i know i dont have to change the ratios if i get 32s. Not sure if i will get 32s. I wanted a wider tyre and saw that pro comp make a 31*12.5*15. So i may get that, not sure yet. But thanks alot for the help.
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

When I had my 32"s I ran stock ratios and it wasn't too bad, was slow, but it is a hilux.
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

Post by Kingston_99 »

Weiner wrote:was slow, but it is a hilux.
yep thats true
Top
Posts: 214
Joined: Tue Sep 15, 2009 5:28 pm
Location: Bathurst

Post by Jack S »

Ray_215 - just wondereing whats involved in changing the gear ratios?
Top
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

Post by Kingston_99 »

Jack S wrote:Ray_215 - just wondereing whats involved in changing the gear ratios?
you ever heard of the search function or look it up on google?
Top
Posts: 214
Joined: Tue Sep 15, 2009 5:28 pm
Location: Bathurst

Post by Jack S »

just thought i would see how Ray_215 is going to do it....
Top
Posts: 410
Joined: Sun Jun 29, 2008 11:30 pm
Location: Melbourne, Australia

Post by craz3d »

Jack S wrote:just thought i would see how Ray_215 is going to do it....
the same way as everyone else maybe?

pull apart the diff and change the gears?
Top
Posts: 214
Joined: Tue Sep 15, 2009 5:28 pm
Location: Bathurst

Post by Jack S »

right oh guys, no need to be smart-asses
Top
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

Dont be put off, its just we get alot of common questions asked that could be easily answered easier by a little search.... Use the search function above on outers or google....

But basically lux centres are relatively cheap (if you buy them in the right place) so easier to just buy a whole new centre and change the complete centre over....

Search this as there is heaps of info.....

To give you an idea, a 2nd hand centre should cost $150-300 and a gear set change could cost between 400-600 depending on who you get to do it, what gears you put into it and weather its a full rebuild or just gear change...

Dont recommend you change the gears yourself unless you know what you are doing....

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests