Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

welding stainless to mild steel

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 137
Joined: Mon Jun 09, 2008 11:05 am
Location: Gladstone

welding stainless to mild steel

Post by one_waz »

Will i be right to weld 1inch solid stainless to mild steel plate with my mig using normal wire/argosheild?
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

steel

Post by DR Frankenstine »

Yes
Remember some days your the pigeon and other days your the statue
Posts: 137
Joined: Mon Jun 09, 2008 11:05 am
Location: Gladstone

Post by one_waz »

cheers mate
Posts: 30
Joined: Wed Oct 07, 2009 6:05 am
Location: Vic

Post by FRLS4B »

if u dont mind the rust :cool:
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

rust

Post by DR Frankenstine »

FRLS4B wrote:if u dont mind the rust :cool:
If he minded the rust he wouldnt be using mild steel
Remember some days your the pigeon and other days your the statue
Posts: 30
Joined: Wed Oct 07, 2009 6:05 am
Location: Vic

Post by FRLS4B »

The best way to successfully weld SS to MS or even Hardened Tool steel to MS is to use Magna 303 welding rod mfg by Magna Industrial, Australia. It has been tried and tested and is the only successful way to weld different steels and the weld has a tensile strength of 1,20000 psi, but these rods are expensive and suitable primarily for maintanence or repair welding
Posts: 137
Joined: Mon Jun 09, 2008 11:05 am
Location: Gladstone

Post by one_waz »

thanks for the replies
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

yes they weld togther fine
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

FRLS4B wrote:The best way to successfully weld SS to MS or even Hardened Tool steel to MS is to use Magna 303 welding rod mfg by Magna Industrial, Australia. It has been tried and tested and is the only successful way to weld different steels and the weld has a tensile strength of 1,20000 psi, but these rods are expensive and suitable primarily for maintanence or repair welding
Yet another case of "a little knowledge is a dangerous thing".
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 30
Joined: Wed Oct 07, 2009 6:05 am
Location: Vic

Post by FRLS4B »

its like saying sure u can weld your rocksliders onto your chassis, 'she'l be right mate!' not understanding the physics and properties of steel can be near fatal depending on where the weld is and what its doing, thats why engineering exists :)
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

We used to weld mild steel to stainless or mild to mild etc whenever we need to with stainless filler rod and TIg cause we had no real need to buy full packs of filler rod for infrequent use. always welded fine and never any strength issues. In fact I often find that the stainless filler rod is neater to use than the "correct" stuff which we finally bought cause we had a big non stainless and could finally warrant it
Posts: 30
Joined: Wed Oct 07, 2009 6:05 am
Location: Vic

Post by FRLS4B »

alot of people use stainless filler rod, including myself on mild steel applications as it greatly reduces perosity, i guess i see things more from an engineering perspective, as it gets very nitty gritty when drawing on CAD software and there are 20 white collar know it alls wanting perfection.
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

True but I doubt any of those 20 are members of outers and if they were it woudlbe unlikely they would be asking that question here.
Posts: 137
Joined: Mon Jun 09, 2008 11:05 am
Location: Gladstone

Post by one_waz »

so am i better off using stainless filler and TIG, or just regular MIG/argosheild? i have both
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

standard mild wire and your argoshield will be fine
cheers andrew
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

steal

Post by DR Frankenstine »

The answer was easy




YES!!!!!
Remember some days your the pigeon and other days your the statue
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Welding stainless to mild steel isn't exactly rocket science, we're not talking about some of the exotic metals here. If you want to be pedantic then use grades 309L or 309Mo Stainless rods/filler wire this is an accepted standard worldwide.
If all you've got is mild steel Mig then use that it will be fine it just won't be the "perfect" solution but it will do the job.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 137
Joined: Mon Jun 09, 2008 11:05 am
Location: Gladstone

Post by one_waz »

ok thanks, will use TIG and ER 316 wire,
Posts: 16
Joined: Tue Apr 21, 2009 7:48 pm
Location: victoria

Post by v8lux »

wouldnt dream of using mild steel wire in a mig to weld stainless to mild steel :shock: ,if you dont believe me try it ,then put what you have welded in a vise and give it a good whack with a hammer and see what happens .
there is absolutely no strength using this method and dont let anyone tell ya otherwise. People get hurt due to miss -information if you are not sure ask a qualified expert (theres plenty of people claiming to be experts on here but dont believe everything you read just because they have a picture of a welder on their profile)
Cheers Brad
Posts: 30
Joined: Wed Oct 07, 2009 6:05 am
Location: Vic

Post by FRLS4B »

:shock:
i understand what you guys are saying, theres an absolutely right way to do things, then theres the it will be good enough for the application way to do things. Too many people think like this, and thats why vehicles need to be engineered and certified because anyone can pull their 20 year old arc welder out and re adjust body mount points on their vehicle, who pays the price in an accident when an innocent family dies?

anyway im going off topic, when welding mild steel to stainless, your introducing lead corrosion to it, all the chromium that is in the stainless will be useless around the weld joint as its now been impregnated by the elements of the mild steel, i dont claim to be an expert im only a 4th year sheety :lol:
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

v8lux wrote:wouldnt dream of using mild steel wire in a mig to weld stainless to mild steel :shock: ,if you dont believe me try it ,then put what you have welded in a vise and give it a good whack with a hammer and see what happens .
there is absolutely no strength using this method and dont let anyone tell ya otherwise. People get hurt due to miss -information if you are not sure ask a qualified expert (theres plenty of people claiming to be experts on here but dont believe everything you read just because they have a picture of a welder on their profile)
Cheers Brad
Ok Brad. What's your claim to Boilermaking fame? If you'd like to turn it into a pi$$ing contest I'm up for it.
I've got DOL tickets 1,2,4,7 (stainless endorsed) and 10 (welding inspector/supervisor) and Boilermaker proficiency certificate since 1978.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 141
Joined: Fri Nov 12, 2004 4:46 pm
Location: Newcastle

Post by mickbeny »

awill4x4 wrote:Welding stainless to mild steel isn't exactly rocket science, we're not talking about some of the exotic metals here. If you want to be pedantic then use grades 309L or 309Mo Stainless rods/filler wire this is an accepted standard worldwide.
If all you've got is mild steel Mig then use that it will be fine it just won't be the "perfect" solution but it will do the job.
Regards Andrew.
Hi all...Spot on,Thats how we have done it over the last 25yrs doing jobs for Esso,BP,Woodside petrolium ect ect.
PEACE...
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

mickbeny wrote:
awill4x4 wrote:Welding stainless to mild steel isn't exactly rocket science, we're not talking about some of the exotic metals here. If you want to be pedantic then use grades 309L or 309Mo Stainless rods/filler wire this is an accepted standard worldwide.
If all you've got is mild steel Mig then use that it will be fine it just won't be the "perfect" solution but it will do the job.
Regards Andrew.
Hi all...Spot on,Thats how we have done it over the last 25yrs doing jobs for Esso,BP,Woodside petrolium ect ect.
yep x2 all the above methods will work just fine.
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

I have to agree as well ;) ... coming from petro/high pressure background.

just need V8Patrol to get on board and it will be a complete .....piss fest :roll: :armsup:
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Posts: 16
Joined: Tue Apr 21, 2009 7:48 pm
Location: victoria

Post by v8lux »

did i miss something here :?: what you are all saying is that it is quite acceptable to weld stainless steel to mild steel using a mig with mild steel wire :!: and on top of that no one has even asked the application for which they are being welded.

Yes i agree the tig methods discussed would be fine , however APPLICATION is the key word .In an ideal world for anything that requires structural or mecanical strength, you would try to eliminate the need to weld the two unless absolutely necessary (design review), even then a qualified welding procedure should be used.I doubt very much that there is a qualified welding procedure for welding stainless to mild using a mig with mild steel wire if there is one id love to see it :D Id also love to see the macros and the radiograph or even the charpy results.

Im not here for a pi$$ing contest i dont need to post all my quals and tell you all how good iam so i can feel better about myself.
Im just voicing my opinion based upon technical knowlege ,experience, education and Trade experience also some good old fashioned common boilermaking knowledge
Cheers Brad

(DOL tickets were superceeded in 1998 with WTIA certificates )
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: welding stainless to mild steel

Post by chimpboy »

one_waz wrote:Will i be right to weld 1inch solid stainless to mild steel plate with my mig using normal wire/argosheild?
What's it for?
This is not legal advice.
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

GO the other way and bolt it together. That will keep the boilies and sheeties happy, but prob send the engineers around the bend even more.

If your worried about Builders complaining, just use some liquid nails, then call the painters in to make it look good
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

v8lux i think everyone here is not saying you cant use normal mig wire or even use standard MS filler rod for tig but Awill4x4 was just stating some sound knowledge ;) ......

and as for (the piss contest) stupid comments about someones aviator, shows somewhat of a childish attack on someone professionally...... everyone chill :D
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

awill4x4 wrote:
v8lux wrote:wouldnt dream of using mild steel wire in a mig to weld stainless to mild steel :shock: ,if you dont believe me try it ,then put what you have welded in a vise and give it a good whack with a hammer and see what happens .
there is absolutely no strength using this method and dont let anyone tell ya otherwise. People get hurt due to miss -information if you are not sure ask a qualified expert (theres plenty of people claiming to be experts on here but dont believe everything you read just because they have a picture of a welder on their profile)
Cheers Brad
Ok Brad. What's your claim to Boilermaking fame? If you'd like to turn it into a pi$$ing contest I'm up for it.
I've got DOL tickets 1,2,4,7 (stainless endorsed) and 10 (welding inspector/supervisor) and Boilermaker proficiency certificate since 1978.
Regards Andrew.

Whats the difference currently... when i did the preessure ticktet course was 8g for mig welding


thats in nsw though
xxxx wrote:
:bad-words: :snipersmile:
Posts: 137
Joined: Mon Jun 09, 2008 11:05 am
Location: Gladstone

Post by one_waz »

it is for a shockie mount, will be solid stainless welded into mild steel plate, similar to most shock mounts, its hard for me to explain, hopefully u all know what im talking about.
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests