Possibly going to get flamed for not reading all of the threads that came up when I searched but here goes . . .
My GU ute is just about at the end of the lease (not that that has really got in the way of me modifying the crap out of it). I have been reading a lot of the intercooler threads with interest because this and the DTS turbo upgrade were on the project list for this year. When I start adding up the costs of getting a custom intercooler made and the DTS turbo upgrade I started to realise that I could probably stick in a fuel injected V8 for that sort of price.
I can't run LPG because I use the car as a daily driver and it freezes over the winter months up/down/across here in the Snowy Mountains.
What am I likely to unload the TD4.2 with around 100k on it for (probably with the 5 sp gear box)?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Pondering power upgrade options
Pondering power upgrade options
I'm not very good looking, so I guess I better be useful . . .
Re: Pondering power upgrade options
Kyles conversion to the VH45 was around $13000 to complete... thats engineered and all...
Turbo and IC will cost you around $6000...
as you say about bein flamed, read the 290348203942093402934802394809 other powerup threads, there are a few good ones there...
Turbo and IC will cost you around $6000...
as you say about bein flamed, read the 290348203942093402934802394809 other powerup threads, there are a few good ones there...
go the VH45, it's a quad cam V8. Alloy motor so light, very strong bottom end so will take some serious power upgrades ie, supercharge, or twin turbo's (with intercooler). And it is a Nissan engine so makes it better again. When you buy the half cuts they usually come with the auto and wiring loom, just need to get the output bits of a GQ auto to bolt it up to the transfercase.
TUrps
might go this way myself.
TUrps
might go this way myself.
Thanks - at home I only get around 19 kbps connection speed so you can probably understand why I soon draw impatient at waiting for the enormous number of threads to load that came up when I searched.
Will persevere again tonight and see what turns up.
Will persevere again tonight and see what turns up.
I'm not very good looking, so I guess I better be useful . . .
Who is online
Users browsing this forum: No registered users and 1 guest