Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wiring a tacho

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

Wiring a tacho

Post by Jonezy01 »

Were are they normaly wire to, can the average DIYer do it. or is it best left to a auto electrician.(Turbo Diesel 80 Series Cruiser)
Top
Posts: 11
Joined: Fri Jul 24, 2009 11:58 am
Location: Cairns

Post by dabulg »

Pretty sure the 80 series diesels ( like mine ) have a sender on the fuel pump in the fancy models. Mine being the DX pov pack model doesn't have the sender in the fuel pump.

Be an expensive option to change the fuel pump to get a rev counter. Check out tiny tach in the states. They can make a transducer to suit the fuel line and is all digital.

Dan.
Top
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

Post by Jonezy01 »

Chears dabulg, found out that they can either come off injecters or alternator. But they mostly off the alternator, easy enough but still a job for the auto electricion. Thanx Any Way.
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 1 guest