We are looking for anyone who can help us confirm the dimensions for a RHD cowl for the Land Cruiser FJ40 series. We have had many requests for a RHD system and we are ready to put them into production, as we have a few orders pending. We want to confirm that the fuel filler is on the right hand side and the dimensions on the image attached are correct. If anyone has any information to contribute, we would greatly appreciate it.
Thanks,
Aqualu
www.aqualu.com
info@aqualu.com
Please click on link below to view image of dimensions we require.
http://www.facebook.com/photo.php?pid=2 ... 4112597339
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Aqualu Aluminum RHD Dimension Help!
Moderators: toaddog, Elmo, DUDELUX
Aqualu Aluminum RHD Dimension Help!
Last edited by Big-D on Wed Oct 21, 2009 8:13 am, edited 1 time in total.
mmm
I can check it tonight for you.
Can you confirm that you want distance to centre ? If so it will be pretty hard to get an accurate measuremnet with steering column and Master Cylinder fitted. Would be easier to get you an OD measuremnet to the edge or one of the mounting holes.
Can you confirm that you want distance to centre ? If so it will be pretty hard to get an accurate measuremnet with steering column and Master Cylinder fitted. Would be easier to get you an OD measuremnet to the edge or one of the mounting holes.
Re: mmm
Thank you!SteelArt wrote:I can check it tonight for you.
Can you confirm that you want distance to centre ? If so it will be pretty hard to get an accurate measuremnet with steering column and Master Cylinder fitted. Would be easier to get you an OD measuremnet to the edge or one of the mounting holes.
Yes. It would be best to get the distance to center, but I understand if you are only able to get the outside dimensions.
Also please let me know what year your cowl is.
Thanks again for all your help we really appreciate it,
Aqualu
www.aqualu.com
info@aqualu.com
Hey Guys - Any luck with the measurements? 
We have wanted to get our products over to Australia for quite some time now, hopefully with the addition of this new RHD aluminum cowl we can make this happen. We have recently been exploring the possibilities of filling a container. We would accept pre-sale orders and once we had enough to fill a container we would ship it over. When we are ready to start this process and begin accepting orders, we will post more information online (forums) as well as our web site www.aqualu.com
At this time, shipping for a complete Land Cruiser Tub & Cowl is approx. $1150 USD + customs clearance/ VAT's for ocean export to Melbourne.
We thank you all for your comments and continued support and look forward to getting this RHD cowl over to Australia soon.
Aqualu Industries Inc.
www.aqualu.com
Feel free to e-mail us directly (info@aqualu.com) with any questions you may have.
We have wanted to get our products over to Australia for quite some time now, hopefully with the addition of this new RHD aluminum cowl we can make this happen. We have recently been exploring the possibilities of filling a container. We would accept pre-sale orders and once we had enough to fill a container we would ship it over. When we are ready to start this process and begin accepting orders, we will post more information online (forums) as well as our web site www.aqualu.com
At this time, shipping for a complete Land Cruiser Tub & Cowl is approx. $1150 USD + customs clearance/ VAT's for ocean export to Melbourne.
We thank you all for your comments and continued support and look forward to getting this RHD cowl over to Australia soon.
Aqualu Industries Inc.
www.aqualu.com
Feel free to e-mail us directly (info@aqualu.com) with any questions you may have.
Who is online
Users browsing this forum: No registered users and 0 guests