Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

forunner tyre size quiz

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

forunner tyre size quiz

Post by shortyq »

what is the largest tyre size running a 16'rim that can be fitted
to one of these, std suspension,being ifs, dont want to do suspension
but running 2'body or more?

cheers!
Top
Posts: 245
Joined: Tue Mar 17, 2009 9:23 pm
Location: Sydney

Post by 4RUNNER_01 »

I rekon you could get 40's under it but might have no floor or guards or flex... thats the go but...

But really you can probably sqeeze 33's maybe without chopping much...
BOBBED 84' 4Runner 2.8L Chugger
35's, Locker's, High steer, RUF, 4 link rear, Crawler Gears.
Top
Posts: 86
Joined: Fri Sep 02, 2005 4:48 pm

Post by 904Runa »

225/75/16s will be fine, 9mm over standard.

Maybe 245/75/16s (31s).

4Runner_01, your rig is about the setup I want. I got some 35s in a 16", but mine is the later IFS and chain t/f case, so I haven't worked out the crawler gears yet. And the 35s will need some guard chopping I reckon.
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Post by shortyq »

im looking at 285 75@32' was just seeing what others
have run with min mods!
no hard out wheeling,bit of beach, mainly road plus the extra
h/way gearing on top.
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

32's will be bout the max you can go and may have some minor scrubbing on full flex at the back of the front wheel arch depending on rim offset.
If not doing any hard wheeling, then should be all good.
If you keep to the std ifs offset rims (-8 I think) then you will be much less likely to have any probs.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Post by shortyq »

cheers doug,yes std rims
Top
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

shortyq wrote:im looking at 285 75@32' was just seeing what others
have run with min mods!
no hard out wheeling,bit of beach, mainly road plus the extra
h/way gearing on top.
285/75/16s are roughly the same size as 33s, with a 2inch BL they may fit. I run 265/75/16 on my Lux with near stock suspension and they do rub on full flex. If you go to a 285 then you are best to run an 16x8 rim but if sticking with a 265 then a 16x7 will suffice, the 16x8 will most likely need flares as they may stick out a little
Top
User avatar
shortyq
Im here for the sausage!
Posts: 462
Joined: Tue Jul 21, 2009 1:25 pm
Location: next to a big hole in the ground

Post by shortyq »

most of the 285,s iv looked at seem to run 240 shoulder to shoulder!
its the height thats the thing!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests