hey fellas. i just had my engine mounts done but didnt do the gearbox mounts at the same time(like i should) and now my clutch pedal feels loose and fairly soft and there is a little tic tic noise like something rubbing agains something and a bit of a vibration. now could anything of been bent or broken or moved while jacking up the engine?? it still changes gears eaisly enough and i dont think its the gearbox so what are your suggestions??
Thanks fellas
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
clutch noise??
clutch noise??
Soccer, Cricket and Footy all require 1 ball to play. My sport requires 2!!!!
95 GQ,lift,33's,IPF's,exhaust,4400,dual batts,Engel,custom sliders,drawers,snorkel.
95 GQ,lift,33's,IPF's,exhaust,4400,dual batts,Engel,custom sliders,drawers,snorkel.
Check the sump for damage/bending at the front if its TD42 as there is sweet FA clearance between the crank and the sump up there. If it is touching you will get the symptoms you discribed. Just get a rubber mallet and hit the side of the sump on the angle parts to pop it back out again. Or take it off and knock it out again.
Peninsular Diesel Repairs
59 788 400
59 788 400
Who is online
Users browsing this forum: No registered users and 1 guest