Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body conversion for a NT

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 62
Joined: Thu Aug 20, 2009 6:10 pm
Location: Brisbane QLD

Body conversion for a NT

Post by Mitchie »

hey guys my mate driver91 has just picked up a nt zook with a 1.6l corrola engine coversion is it the problem with it is the body is full of rust, just wanting to know how much would be invovled in converting the body from another nt that he owns (rolling body and chassie) to this 1.6 corrola chassie.
Thanks Mitchell
Top
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

Post by Ridge »

Would not be very hard, disconnect the wiring loom, speedo cable, body mounts and breaks. Pull the dash and loom out of the 1.6 to put in the new body.
4age zook ute in lots of bits
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Yeh its a pretty simple job. Make sure you get all the body bolts, then lift it slowly and disconnect anything that comes away, pretty much everything Ridge mentioned, as well as steering column, clutch cable, fuel lines, etc...
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest