hey guys..i have a hilux with 3 inch suspension 2 inch body and 2 inch shackles on 33's..Im going to get it engineered in a few weeks and am taking the shackles out to do so..When fitting standard shcakles back in is there any problems i might run into or is it pretty straight forward?
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Removing Extended Shackles
Moderators: toaddog, Elmo, DUDELUX
Take the shock completely out (not hard all you need is a 17mm spanner to undo the 2 bolts on each shock).
compress it completely and measure it, then extend it and measure it.
Then measure the distance from shock mount on diff to shock mount on chassis.
Cheers
Dan
compress it completely and measure it, then extend it and measure it.
Then measure the distance from shock mount on diff to shock mount on chassis.
Cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Who is online
Users browsing this forum: No registered users and 1 guest