Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

URGENT. NEW GEARSET IN DIFF WHINING ON COAST.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 67
Joined: Sat Jul 18, 2009 5:37 pm
Location: Bringin some Rocky flavour to the Coffs Coast

URGENT. NEW GEARSET IN DIFF WHINING ON COAST.

Post by 76patrol »

today i swapped in a new 4.6 ratio into the rear of my troll. all backlash settings were good but on coast it seems to whine loudly. should i be worried? thanks in advance. ray
that f***n hippy in that f*"*""n g60

76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.

buildup at downunder4x4.net
Top
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

yes!!! of course you should be worried!

Pull it apart and check it again. if you can't see what is wrong take it to a specialist diff joint. Slightest fookup and you'll be completely reconditioning it again in no time.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: URGENT. NEW GEARSET IN DIFF WHINING ON COAST.

Post by bogged »

is it a "NEW" gearset, or are they new to you?
if they are old, they may have a shit wear pattern in them
if not, Yon is on the mark.
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Agreed, are both crownwheel and pinion new, or at least a matched pair? A new componant and a used one are going to whine like crazy.
Mud makes excellent toothpaste.
Top
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

IF your back lash is %100 correct and you still have a whine, then your pinion depth is wrong.
the two pinions should have a the checking depth marked on them.
By comparing the two numbers and the depth shims (i'm not %100 sure how the nissan diff adjust its pinion depth), you can work out how much shim is used to correct for machining tolerance on the carrier and how much shim is there for the pinion.
In doing so you can work out how much shim needs to be there for the new pinion.

Did you check the contact pattern?
http://www.mothfukle-engineering.com/
Top
Posts: 337
Joined: Wed May 21, 2008 3:47 pm
Location: Birkett Place sth geelong

Contact:
Contact Auto-Craft

Post by Auto-Craft »

Are they mazziarro italian gearsets ?
Supercharged 80 SOLD - "OPERATION SANDY" now in effect.
Top
Posts: 67
Joined: Sat Jul 18, 2009 5:37 pm
Location: Bringin some Rocky flavour to the Coffs Coast

Post by 76patrol »

thanks guys. yes they are antiono gears.? they are both new and a matched pair. i think i will pull it out and take it to a pro.
that f***n hippy in that f*"*""n g60

76 troll rockin a rb30 gq driveline, rollin on 37's and flexin with a 4 link.

buildup at downunder4x4.net
Top
Posts: 107
Joined: Mon Jan 15, 2007 2:45 pm
Location: Central Coast

Post by thelux »

Mate of mine had new gears put in the front of his cruiser when the locker was installed and they used to whine like crazy. Apparently with new gears they haven't 'worn' in and will whine, anyway it went away and is now 100%.
Current ride,
96 GQII TD42
Previous rides,
87 High Lux single cab. Yes she was my first!
93 80 series Land Cruiser.
Project Zook Vitara. Previously rolled! So I just had to get the 9 inch out!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests