Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need help quick on manual question

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 466
Joined: Sun Oct 11, 2009 5:53 pm
Location: Pakenham, Victoria

need help quick on manual question

Post by HUSSLN »

Ok found an unfinished 86 4runner project on ebay with vn v6, its all bolted in but has the manual behind it not the auto like mine. It says has brand new heavy duty clutch an blah blah blah. Will the manual be fine to go into mine? If i can get it cheap enough it would make the conversion alot easier cos i would have everything i need rather than constantly chasing parts.
Top
Posts: 72
Joined: Tue Sep 01, 2009 3:22 pm
Location: FNQ

Post by Towie »

I dont know mate but get on the blower & call terain tamer or Marks adaptors they will know.......
6.5 Turbo Chevy in a 2001 patrol wagon with alot of shit on it..
Top
Posts: 466
Joined: Sun Oct 11, 2009 5:53 pm
Location: Pakenham, Victoria

Post by HUSSLN »

i know it will bolt upto the engine, as it has the marks bellhousing, just curious if the boxes are the same length an shit to bolt upto my transfer case or just use the t/case off the 4 runner?
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest