Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What is the best 80 series part time kit to buy.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 39
Joined: Thu Feb 26, 2009 8:08 pm
Location: gladstone

What is the best 80 series part time kit to buy.

Post by mrgrumpysleeps »

I want to part time my 80 extra cab. I'm going to put genuine manual locking hubs up front just need the rest of the gear. I haven't had anything to do with the kits before so i dont know who has the best gear. A heads up would be great.

cheers.
todd.
Top
Posts: 751
Joined: Tue Jul 24, 2007 8:55 pm
Location: GlassHouse Mountains

Post by taps »

Marks Adaptors
YOUR 4X4 ACTION
personalized 4x4 d.v.d's
"Let us capture your action" [url=http://au.youtube.com/watch?v=QefnzCt975c][b]Click Here To View Our Video Trailer[/b][/url]
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

by far the cheapest and easiest is to find a part time transfer and tailshafts.
Free air locker to the first 20 callers!
Top
Posts: 166
Joined: Tue Mar 04, 2008 4:04 pm
Location: SW Victoria

Post by djroberts »

just did this in mine, there are two part time cases: manual and electric.

i used the manual fj80 t-box and only needed rear shaft (50mm longer) - bolts straight in - did a longfield upgrade when i had the hubs off too.

part time conversion was heaps cheaper than any kit, made it quieter and removed a lot of the backlash from the drivetrain - didn't have to pull the case apart either!
loose as a goose
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

djroberts wrote:, there are two part time cases: manual and electric.
an electric part-time transfer case is a full time case that has been converted. the HF1A Part time) is always manual select and the HF2A is electric diff lock, manual low range select.

but yes agree that finding a part time case and tailshaft is by far the cheapest, easiest part time conversion. takes about 2 - 3 hours.
Free air locker to the first 20 callers!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 60 guests