Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series wheels on to 75 ute

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1
Joined: Sat Nov 07, 2009 12:41 pm
Location: Millmerran

80 series wheels on to 75 ute

Post by merrawindi »

Hi does any one know if 80 series wagon wheels will fit a 75 series ute?
Thaks
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

16" GXL rims won't fit an early 75 (pre 88? Big diff model) - from memory the inside of the rim contacts the TRE. Not sure about the later models...
Tetanus rolling on 37's
Top
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

dogbreath_48 wrote:16" GXL rims won't fit an early 75 (pre 88? Big diff model) - from memory the inside of the rim contacts the TRE. Not sure about the later models...
hey stu i put my rims on the rear of my brothers (94 GXL 80 rims on to bj73)

so not sure about the front
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

duck wrote:
dogbreath_48 wrote:16" GXL rims won't fit an early 75 (pre 88? Big diff model) - from memory the inside of the rim contacts the TRE. Not sure about the later models...
hey stu i put my rims on the rear of my brothers (94 GXL 80 rims on to bj73)

so not sure about the front
Yeah i can't see any reason they wouldn't fit the rear. There was about 25mm interference against the tie rod end - i.e. the 9" 80s rims have the extra width (over a toyo 8") on the inside (extra backspacing rather than offset???)
Tetanus rolling on 37's
Top
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Post by GO79 »

there is a thread on ih8mud with a 75 series with the 16" 80 series gxl rims but its a later model 75
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 78 guests