Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Some of you may remember I had locker troubles about 4 months ago, Anyway I've got the locker back now and it's all back connected up and I went to engage it on Friday night and all I heard was a 'click', The compressor didn't pump up or anything?
What could it be? Don't know heaps about that side of them really.
His a picture of my compressor, Should the wires that arn't plugged in be plugged somewhere?
Not sure how any of them came un done if they have but yeah..
Cheers.
Team Lock n load.
www.facebook.com/locknloadaustralia
Hard to tell but looks like the pressure switch is disconnected. The two single female plugs should click on there, One is a red wire and the other is red and white
Luxo wrote:Hard to tell but looks like the pressure switch is disconnected. The two single female plugs should click on there, One is a red wire and the other is red and white
Just hooked up them wires (I gathered that should of went on, But wasn't sure didn't wanna short anything out) and now it pumps up and lets the air out when turned off.
Working how it should
Thanks again !
Team Lock n load.
www.facebook.com/locknloadaustralia
