Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

F77/78 Series Rocky Gearbox and Transfer case

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 11
Joined: Wed Nov 11, 2009 12:42 pm
Location: Clarence Town, NSW

F77/78 Series Rocky Gearbox and Transfer case

Post by gravy »

Anyone rebuilt these items, are parts available and who supplies them?

See wanted section.

Thanks in advance
Top
Posts: 3
Joined: Fri May 15, 2009 8:53 pm
Location: Adelaide

Post by Rocky South Oze »

I am in the process of rebuilding both, needless to say it is a time consuming job which requires loads of time and specialist tools.

bearings and seals can be obtained from BSC or CBC. just don't expect them to be cheap.

Good luck.
Top
Posts: 120
Joined: Tue Aug 11, 2009 11:53 pm
Location: Launceston, TAS

Post by wacky »

Whilst its not a Rocky case, I rebuilt my Feroza transfer case for about $150 in parts (bearings, seals and Nulon 75w90 oil) and under $80 in labour (because I couldn't pull or press a couple of the bearings myself).
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 25 guests