Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hairline crack in gearbox filler plug thread - 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 4
Joined: Sat Oct 28, 2006 2:46 pm
Location: Northern Victoria

Hairline crack in gearbox filler plug thread - 80 series

Post by kytomitt »

I must have over tightened the filler plug on my 80 series gear box causing a fine crack through the thread. It's enough to cause an oil leak. Previously, I've made a quick fix using a 2 part putty (minute mend or the like) - any other suggestions?
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Is the plug cracked or the housing?

Assuming the housing, would a bigger seal maybe cover it up? If not your sealant method maybe your best bet.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 4
Joined: Sat Oct 28, 2006 2:46 pm
Location: Northern Victoria

Post by kytomitt »

It's the housing that is cracked - as I tighten, the crack spreads open. Too big for larger seal...
Top
Posts: 122
Joined: Fri Jul 17, 2009 6:13 pm
Location: MT ISA

Post by aussie blue 60 »

weld it up, ive had a xcel one welded by a aluminum welder guy do it.
Drain box 1st, so no oil is left and you have a nice clean surface to weld on.
Last edited by aussie blue 60 on Fri Nov 13, 2009 1:33 pm, edited 1 time in total.
60, lockers, turbo running 18pound, fmic,
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

bit hard to weld up if its got oil leaking out through it

your probally going to have to strip the housing to do it properly

and just out of coincidence i have an 80 series 5 speed here for sale :)
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 549
Joined: Sat Jul 23, 2005 5:33 pm
Location: Sunshine Coast

Post by Frankenyota »

Have repaired one with metal mend, a two part epoxy.
Someone has over tightened the filler plug.

Matt
'83 dual cab lux, v6 auto, duals, RUF, crossova steering, IFS rears, 35" MTRS
2000 HZJ105 turbo with extras
Top
Posts: 128
Joined: Mon Oct 23, 2006 5:29 pm
Location: Melbourne

Post by rezpkt »

This should do the trick
http://www.selleys.com.au/Selleys-Autof ... fault.aspx
Team: Cause For Concern
http://www.offroad80s.com
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 91 guests