Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

buying gu with cracked chassie

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

buying gu with cracked chassie

Post by big lux »

i want to build a comp rig and we have at work 2x 4.2ltr turbo diesel gu wagon with cracked chassie at the rear spring mount boss says its to expensive to fix and i can buy it if i want. Was thinking this could be a good bassis for me how hard/expensive is this to properly fix so it wont happen again.
Blown ls1 GQ winch truck. and GU tow car / daily
Posts: 1081
Joined: Sun Jul 20, 2003 10:43 pm
Location: Melbourne

Post by B.D.R »

I know my Boss, paid $800, do get the Chassis on our Drill rig fixed, that was both Chassis rails cracked, and an Engineer to do it.

My Gq was Cracked there, and a mate welded it up for nothing, so far it has'nt cracked again :armsup:
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

to expensive to fix LOL

its thats the case how cheap is he selling them i will take one :roll:
94 Patrol Petrol 3.0L lift, tyres, winch
90 WT Serria locked diff, Muddies
Posts: 416
Joined: Tue Jul 24, 2007 7:35 pm
Location: nth qld sumwhere

Post by big lux »

ive found all sorts of things i want i pulled a td42 turbo complete blown up out of a ute the other day nd might buy that nd rebuild it to put in my gq too as he only wants wat its worth in scrap metal. turbo pump and all. da boss is away next week but ill see him and see wat i can get if i can get both trolls cheap ill sell one on here.
Blown ls1 GQ winch truck. and GU tow car / daily
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Cracks are very expensive to fix. especially in a patrol. :D I will buy them both and save your boss and you a lot of money. :lol:

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

A cracked chassis is not expensive to fix , a comp rig does not need a engineering approval after the work is performed, we have been repairing heaps of torn and cracked GU chassis lately around the coil towers, approx cost is $450 .
Approx $150 for the brace kit and $300 labour ( depending on extent of the damage )
Anyone charging heaps to repair chassis is just ripping you blind!!
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ludacris wrote:Cracks are very expensive to fix. especially in a patrol. :D I will buy them both and save your boss and you a lot of money. :lol:

Cris
I was thinkin the same thing :rofl: :rofl: :rofl:
Posts: 195
Joined: Sun Apr 20, 2008 10:10 pm
Location: sunshine coast

Post by patrol28 »

yeah im looking for 4.2 running gear to change out my 2.8 so let me no im chasing one
https://www.suspensionstuff.com.au/shop/product_info.php?cPath=137_40_69&products_id=996
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

:D = Joking!! Lighten up.

I agree, repairs are cheap and easy. We have done a few for $250 including bracing.

Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

SuperiorEngineering wrote:A cracked chassis is not expensive to fix , a comp rig does not need a engineering approval after the work is performed, we have been repairing heaps of torn and cracked GU chassis lately around the coil towers, approx cost is $450 .
Approx $150 for the brace kit and $300 labour ( depending on extent of the damage )
Anyone charging heaps to repair chassis is just ripping you blind!!
Do you do these brace kits before the chassis has cracked? What do they consist of? Im interested in bracing the rear end BEFORE it cracks.

cheers

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

vanbox wrote:
SuperiorEngineering wrote:A cracked chassis is not expensive to fix , a comp rig does not need a engineering approval after the work is performed, we have been repairing heaps of torn and cracked GU chassis lately around the coil towers, approx cost is $450 .
Approx $150 for the brace kit and $300 labour ( depending on extent of the damage )
Anyone charging heaps to repair chassis is just ripping you blind!!
Do you do these brace kits before the chassis has cracked? What do they consist of? Im interested in bracing the rear end BEFORE it cracks.

cheers

PAUL


Image

http://www.superiorengineering.com.au/p ... ts_id=5949
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

SuperiorEngineering wrote:
vanbox wrote:
SuperiorEngineering wrote:A cracked chassis is not expensive to fix , a comp rig does not need a engineering approval after the work is performed, we have been repairing heaps of torn and cracked GU chassis lately around the coil towers, approx cost is $450 .
Approx $150 for the brace kit and $300 labour ( depending on extent of the damage )
Anyone charging heaps to repair chassis is just ripping you blind!!
Do you do these brace kits before the chassis has cracked? What do they consist of? Im interested in bracing the rear end BEFORE it cracks.

cheers

PAUL


Image

http://www.superiorengineering.com.au/p ... ts_id=5949
hey Mick, on your website it says wagone need 2" body lift, is that just to be able to fit it? As in, could you unbolt the body and lift it, fit the brace then drop the body on its original mounts.
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

mickyd555 wrote:
SuperiorEngineering wrote:
vanbox wrote:
SuperiorEngineering wrote:A cracked chassis is not expensive to fix , a comp rig does not need a engineering approval after the work is performed, we have been repairing heaps of torn and cracked GU chassis lately around the coil towers, approx cost is $450 .
Approx $150 for the brace kit and $300 labour ( depending on extent of the damage )
Anyone charging heaps to repair chassis is just ripping you blind!!
Do you do these brace kits before the chassis has cracked? What do they consist of? Im interested in bracing the rear end BEFORE it cracks.

cheers

PAUL


Image

http://www.superiorengineering.com.au/p ... ts_id=5949
hey Mick, on your website it says wagone need 2" body lift, is that just to be able to fit it? As in, could you unbolt the body and lift it, fit the brace then drop the body on its original mounts.
Aside from the triangle gussets down the side it is a copy of the ones I designed. You can fit it by just lifting the cab Mick.
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

mickyd555 wrote:
SuperiorEngineering wrote:
vanbox wrote:
SuperiorEngineering wrote:A cracked chassis is not expensive to fix , a comp rig does not need a engineering approval after the work is performed, we have been repairing heaps of torn and cracked GU chassis lately around the coil towers, approx cost is $450 .
Approx $150 for the brace kit and $300 labour ( depending on extent of the damage )
Anyone charging heaps to repair chassis is just ripping you blind!!
Do you do these brace kits before the chassis has cracked? What do they consist of? Im interested in bracing the rear end BEFORE it cracks.

cheers

PAUL


Image

http://www.superiorengineering.com.au/p ... ts_id=5949
hey Mick, on your website it says wagone need 2" body lift, is that just to be able to fit it? As in, could you unbolt the body and lift it, fit the brace then drop the body on its original mounts.

This design you cannot fit in a wagon without a bodylift because the body sits lower than what the top coil hats does. ( it drops down in between)
This one is for the utes or wagon with a body lift.
Early in the new year or if we are lucky this december we will manufacture a bent up member that will fit a wagon without a body lift but a new tailpipe will need to be fitted as it will foul on the tail pipe.

Their is also a full gusset kit we sell that welds in around the coil towers to give additional bracing, so if your towers are not bent even the gusset kit will probably stop the towers bending.
I will try and take some photos of the gussets and post then in the next couple of days.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests