I am just wondering if anyone has or have had door sag in the front doors on the MQ patrol. If so how did u fixed it or what do i replace (mind you the doors still open and close just a bit noisey and clunky.
any help would be much appreciated
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ Door Sag
Yep, i had some brass bushes turned up, and made a new pin and it was like new. That was when I had the MK. Haven't had to do the GQ yet but they are the same so the bushes will still fit. Otherwise you can buy them genuine and I don't remeber the cost when & I originally bought them but I think about $80 about 5 year ago so god knows now.
God of Magnificant Ideas!
The brass bushes is the go if you can get onto a lathe,....
If not and this is a RAG engineering fix.... get rid if the hinge pin and bushes and drill out both halves of the hinge to a size that is the same as the shaft/rod that you get.... then weld it in place !!! works for a couple of years but not really the "done thing".... good if ya selling the car but !!
If not and this is a RAG engineering fix.... get rid if the hinge pin and bushes and drill out both halves of the hinge to a size that is the same as the shaft/rod that you get.... then weld it in place !!! works for a couple of years but not really the "done thing".... good if ya selling the car but !!
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
i had it for a few mins when i was switching the doors on my truck with the ones on Ryans, i replaced the hinge on one side but on the other i placed a Jack under the door with a block of wood, ( while i had the door still bolted up ) and jacked the car up lightly on the door and it bent the hinge up just enough to fix the problem. Opens and closes like a dream still and i did it about 6 months ago.
cheers,
Screwy
cheers,
Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Saggy doors yep and silent doormen that sound like you are smacking the door skin with a hammer. Haven't bothered fixing mine either.
Brass bushes sound like the go but i have thought of fitting GQ doors to take advantage of wing mirrors that dont shake so much
Brass bushes sound like the go but i have thought of fitting GQ doors to take advantage of wing mirrors that dont shake so much
flying is easy, just throw your self at the ground and miss
Who is online
Users browsing this forum: No registered users and 3 guests