Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Christmas Group Buy 55W AND 80w hid kits

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Christmas Group Buy 55W AND 80w hid kits

Post by on4tou »

Hi guys, we are offering a group buy for outers memebers. We know times are tuff and everyone is after a better bargain, and we figure if sell more we can afford to make them cheaper.
We are offering a 55w slim kits with a 12 month full replacement warranty (on globes and ballasts) $185 + postage for the slim line ballast kits with a 12 month full replacement
A 80w kit also with a full 12 month replacement warranty for $440- +postage
The globes are all uv cut (so they won't discolour your lenses) The globes and ballasts are all mud and water proof (just don't take them deep sea diving, we sell torches for that) and they have a less than 0.7% failure rate.
also 15w HID torches that come with a car and wall charges we need 5 of these $297
We need a minimum of 10 confirmed 55w and 5 80w kits(payment received) orders to offer this price
All order need to be confirmed buy the 1/12/09 so i will have time to get them to Santa for delivery
Post or PM me if you are interested. (or just let me know if there is another HID product you would prefer me to souce as a group buy for you.)
Steve
On 4 to U
Last edited by on4tou on Wed Nov 18, 2009 8:31 am, edited 1 time in total.
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Re: Christmas Group Buy 55W AND 80w hid kits

Post by mickyd555 »

on4tou wrote: (or just let me know if there is another HID product you would prefer me to souce as a group buy for you.)
Steve
On 4 to U
any interest in HID miners lights (for your head)
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

any interest in HID miners lights (for your head)
these are a 10w hid and come with there own battery chargers car and wall and are the same price as the torches
steve
Last edited by on4tou on Wed Nov 18, 2009 10:38 am, edited 1 time in total.
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

is that $185 for the 55watt kit delivered?....
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

sorry add $16.50 for postage
steve
Last edited by on4tou on Tue Dec 08, 2009 9:22 pm, edited 1 time in total.
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 56
Joined: Wed Feb 01, 2006 8:18 pm
Location: Gladstone, Queensland

Post by Timmeh »

how much for the 80w kits? do they come in hi/low?
Redline is made for a reason!!
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

$440 +postage no they don't come in hi/lo but we have 70w hi/lo for $360
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 252
Joined: Sat Jul 16, 2005 11:15 pm
Location: Newcastle, NSW

Post by Hulksta »

What lights do these kits fit?
THE HULKSTA.... Built by Nissan, Rebadged by Ford, Perfected by Me!
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

Hellas
Lightforce
Narva
RooLite
they come in H1 H3 HB3 HB4 HB5 H4 H7 H8 H9 H10 H11 H12
IF I DONT HAVE IT OR CAN'T GET IT IT NOT MADE IN HID
STEVE
Last edited by on4tou on Wed Nov 18, 2009 11:19 pm, edited 1 time in total.
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

How much for a 55w kit AND adaptors to suit Lightforce XGT's?
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

$50 for any lightforce adaptors kits when you buy a hid kit
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 1
Joined: Wed Nov 18, 2009 2:38 pm
Location: Brisbane

Post by RMB123 »

Do they come in 24V?
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

yes the slim kit are 12/24v and yes we can get the 80w kits in 24v
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

Im definately interested in a 55w kit, plus adaptors to suit XGT's + postage to adelaide! :D

These stupid D1 HID's can piss off, nothing but issues with them dying all the time!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

only about 3 left to go
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Post by GUtripper »

Steve,
70 w H4 hi/lo for $360?
I assume its a straight replacement and OK for GU 4 patrol plastic reflectors/lenses?
Are both high and low HID, or only the high beam?
Can I save the postage and collect from you, am bayside melb.
cheers
Posts: 353
Joined: Sun Jun 27, 2004 9:50 pm
Location: Perth, Western Australia

Post by South »

Any chance on getting these prices on the headlights too? I've got an 80 series and want HIDs for low and high, I've got HID spots already.
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

ok there seems to be some confusion regarding the 70w hi/lo.
it is a single beam H4 70w high beam and 70w high beam mechanical (electromagnetic sliding) It is not recomended at all for on road use. It is very, very bright.
Any chance on getting these prices on the headlights too? I've got an 80 series and want HIDs for low and high, I've got HID spots already
It will work in the 80 series but you will also need another single kit for your low beam.
Steve,
70 w H4 hi/lo for $360?
I assume its a straight replacement and OK for GU 4 patrol plastic reflectors/lenses?
Are both high and low HID, or only the high beam?
Can I save the postage and collect from you, am bayside melb.
cheers
Yes it is straight replacement for a H4 globe and it will go straight into your GU and the globes are all uv cut.
If you want to pick up from me that is fine. We are on the Morningtom peninsula, just past Frankston.
the 70w also come in H1 H3 HB3 HB4 HB5 H4 H7 H8 H9 H10 H11 H12
COST $253 A kit
The 35/70w h4 hi/lo kit will cost $550. that is 35w low and 70w high
for that you get 4 globe that run of 2 ballast it is our top of the range, preminm you beaut kit. These won't be available before chrismast though unless you are first in, I only have a couple left in stock and the next shipment isn't due till next year.
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

hi guys
we will be sending out invoice this weekend so can you please pm me your email address please
also if any one wants to upgrade he 70w slim kits we will do them for $250 a kit
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

hi guys
we still need some of your email address PLEASE The guy that have pay are wating for the rest to pay
if you are not going ahead with it can you please let me know
also if any one wants to upgrade he 70w slim kits we will do them for $250 a kit
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 195
Joined: Fri Oct 03, 2008 9:45 pm
Location: YES

Post by THICKNICK »

is it too late to jump on board
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

no we will fit you in
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

on4tou wrote:sorry add $16.50 for postage but may be more if you get more then one kit
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 195
Joined: Fri Oct 03, 2008 9:45 pm
Location: YES

Post by THICKNICK »

just wondering if you have any idea when we will be receiving them.
cheers
nick
stainless and aluminium polishing northside brisbane. pm for details
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

hi mate the order is on the way those that have pay will get there mid next week the one that haven't pay won't we are still waiting on 3 to pay
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

:oops:

PM sent....

:oops: Bloody work getting in the way of valuable internet time!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 195
Joined: Fri Oct 03, 2008 9:45 pm
Location: YES

Post by THICKNICK »

just receieved my kit this morning, looks the goods. thanks mate.
now to go wire em up.
stainless and aluminium polishing northside brisbane. pm for details
Posts: 195
Joined: Fri Oct 03, 2008 9:45 pm
Location: YES

Post by THICKNICK »

pm sent
stainless and aluminium polishing northside brisbane. pm for details
Posts: 217
Joined: Mon Aug 07, 2006 8:27 pm
Location: Somerville, Vic OZ

Post by on4tou »

all sorted sorry mate
steve
http://stores.ebay.com.au/HIDRUS-LIGHTING
www.hidrus.com.au
For all your HID and Driving Light needs. (Specializing in Hella & Custom builds)
CCDA VP AND MARSHALL TRAINER
trade enquiries welcome
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

Post by rumpig89 »

get my pm's?
Post Reply

Who is online

Users browsing this forum: No registered users and 155 guests