Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1HZ Diesel Fuel Pump Leak from Fuel Adjust Screw

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 47
Joined: Wed Jan 22, 2003 8:41 pm
Location: Melbourne

1HZ Diesel Fuel Pump Leak from Fuel Adjust Screw

Post by Landcruiser Tom »

Hi All,

Finally put a turbo on my 1HZ 80 series and have turned the fuel adjust screw in for more fuel.

I now have a fuel leak from this adjusting screw.

Is there a gasket or O ring that has been damaged? If so, is it easily replaced, or is it within the top cover?

Any help would be greatly appreciated.

Thanks,

Tom.
Top
Posts: 47
Joined: Wed Jan 22, 2003 8:41 pm
Location: Melbourne

Post by Landcruiser Tom »

Possibly sorted.

I bit the bullet and pulled the fuel adjust screw out. There is an O ring on the screw shaft.

Looks like I'll have to ring around on Monday morning to try and find a new one.

Cheers,

Tom.
Top
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

teflon tape fixed mine
Top
Posts: 1042
Joined: Mon May 05, 2008 6:33 pm
Location: MACKAY

Post by SIMMO84 »

Screw it in until its tight........................ :D :D :D :D
Wtb, 105 series rear tyre carrier, alloys and tyres.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 22 guests