Can anyone give me a quick run down on changing the center bearing on a 4wd triton? Or is it as follows:
Unbold tailshaft at diff
Undo hoop around bearing
Slide apart two piece shaft
remove bearing (Is it heald on by any means?)
replace bearing (refer above)
slide two piece shaft back together
fit hoop and bolt at diff
Any hints or tips would be great.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Changing center bearing
Moderator: -Scott-
Who is online
Users browsing this forum: No registered users and 0 guests